Operating instructions

Quick adjustment of fullness regulation
–
Tap on the symbol for the desired
quick adjustment.
The display appears inverted.
–
Enable the fullness with the keys “+ ”and“-”.
Change segments 1, 3 and 5.
–
Tap on the symbol “+17”.
The value is saved.
Parameters of fullness regulation by means of cylinder
Upper feed
Parameter 01: Segment 1
Number of stitches before the upper feed is
switched on
Parameter 02: Quantity of fullness 1 OFF/ ON
Parameter 03: Segment 2
Number of stitches, the length of time during
which the upper feed
is switched on
Parameter 04: Quantity of fullness 2 OFF/ ON
Parameter 05: Segment 3
Number of stitches, the length of time during
which the upper feed
is switched on
Parameter 06: Quantity of fullness in segment 3 OFF/ ON
Differential lower f eed
Parameter 07: Segment 1
Number of stitches before
differential feed is switched on
Parameter 08: Quantity of fullness 1 OFF/ ON
Parameter 09: Segment 2
Number of stitches, the length of time during
which
differential transport is switched on
Parameter 10: Quantity of fullness 2 OFF/ ON
Parameter 11: Segment 3
Number of stitches, the length of time during
which
differential transport is switched on
Parameter 12: Quantity of fullness in segment 3 OFF/ ON
38