Operating instructions

6.4.5.1 Seam Parameters

6.4.5.1.1 Editing the fullness regulation

–

Tap the symbol for upper or lower feed.

The following display screen appears.

With cylinder With stepper motor

1 = Display of the current seam

2 = Display of t he fullness in the home position (stepper motor)

3 = Fullness regulation is enabled

4=Switchingonthesegments

5 = Switching on the segments for quick adjustment on the

main display screen (stepper motor)

6 = Fullness in the 5 segments towards which the sewing motor

moves

7 = Number of stitches in the segments 1 - 5

8=Saving

With cylinder With stepper motor

Segment 1 Segment 2 Segment 3 Segment 1 Segment 2Segment 3 Segment 4 Segment 5

Stitches Stitches Stitches Basic seam Stitches Stitches Stitches Stitches Stitches Basic seam

Note

The parameters of the home positions 2 are located in the “Global

Parameters” with the numbers “40” and “42”.

123