Operating instructions

5.2 Mouse with guide rail and retraction mechanism
The mouse is used for clamping of the trouser parts or skirt parts, in
order to prevent them from sliding.
The guide rail 3 is flexible and must be adjusted to the contour of the
sewing part.
Caution: Risk of Injury !
Do not reach into the mouse when it is open.
Insert sewing part
–
Place the sewing part between the mouse plate 2 and the
clamping arm 1.
–
Press shut the mouse.
During the sewing operation, the mouse is drawn along the guide
rail 3 until the opening of the clamping arm 1 is actuated by a limit
switch.
Then, the mouse is drawn back by the retraction mechanism 4 until
the adjustable limit stop 5 is contacted.
12
321
76 5 4