Operating instructions

8.4.5 Loading software version from the USB stick

–

Enter parameter 523.

–

Press key “E”.

The cursor flashes.

–

Press key “F2”.

The name of the first file stored on the stick appears.

Example

20_5D_1A.PRG

–

Select the desired parameter file with the keys “+” or “-”.

–

Press key “E”.

The message appears.

READ DATA YES = E

–

Press key “E” within 2 seconds.

The data are read from the USB stick.

–

Press key “P” and wait approx. 3 seconds until “Save Data” fades

out.

–

Press key “E” twice.

The cursor flashes.

–

Press key “F2”.

The name of the first file stored on the stick appears.

Example

20_5D_2A.PRG

–

Select the desired program file with the keys “+” or “-”.

–

Press key “E”.

The message appears.

READ DATA YES = E

–

Press key “E” within 2 seconds.

The data are read from the USB stick.

–

Switch the main switch off and on again.

The new software version is loaded now.