Operating instructions

Altering the swivelling device
Via this parameter the swivelling device is adjusted.
Parameter 62: Number of stitches when the blade extends.
Setting range: 0 …00
Parameter 63: Number of stitches how long the blade
remains retracted.
Setting range: 0 …00
Parameter 64: Switch the swivelling of the stacker on or off
Setting range: 0 / 1
Parameter 69:
Input: 0 / 1
Altering the seam lines
Via this parameter the parameters for the individual seam lines are set.
Parameter 81: Length of seam line 1
Setting range: 0 …00
Parameter 82: Switch the speed reduction in seam line 1 on or off
Setting range: 0 / 1
Parameter 83: Reduce the speed in seam line 1
Setting range: 0 …7000
Parameter 84: Switch the stop within the seam on or off
Setting range: 0 / 1
Parameter 85: Switch the sewing foot lift within the seam on or off
Setting range: 0 / 1
Parameter 86: Seam line 2
-
Parameter 90: Values see seam line 1
Parameter 91: Seam line 3
-
Parameter 95: Values see seam line 1
26