Operating instructions

6.4.2 Altering the global parameters

Parameter 45: Number of stitches until the table blowing is

switched on

Input: 0 …200

Parameter 46: Duration of the stacker impulse

Input: 0 ..2000

Parameter 47: Time of stacker movement

Input: 0 …2000

Parameter 48: Speed limitation

Input: max. 7000

Parameter 49: Speed at warp separation

Input: 0 …5000

Parameter 50: Number of stitches until the thread tension

is opened (seam end)

Input: 0....50

Parameter 56: Seam programming on/ off

On = Determine the seam sequences in the current

program

Off = Create the next free program with seams

Input: 0 and 1

Parameter 58: Display of the software version

Parameter 59: Number of stitches how long the seam chain is

sucked (seam beginning)

Input: 0 ...150