Operating instructions

6.4 Adjusting the control

The parameter values are altered in the individual parameter menus.

–

Press key “P”.

–

Select the menu item.

–

Select the parameter to be altered with the keys “F1” or “F2”.

–

Press key “E”.

–

Alter the parameter value with the keys “Plus” or “Minus”.

–

Press key “P”.

The new parameter value is stored.

–

Press key “P”.

You return to the selection menu

–

Press key “P”.

You return to the sewing program

6.4.1 Altering seam-specific parameters

Auxiliary roller

Via this parameter the auxiliary roller is adjusted.

Parameter 13: Number of stitches when the auxiliary roller lowers.

Setting range: 0 …400 stitches

Parameter 14: Number of stitches how long the auxiliary roller

remains lowered.

Setting range: 0 …300 stitches

Adjusting the holding stamp

Via this parameter the holding stamp is adjusted.

Parameter 15: Number of stitches when the stamp lowers.

Setting range: 0 …20 stitches

Parameter 16: Number of stitches how long the warp separator

remains switched on.

Setting range: 0 …100 stitches

Parameter 17: Switch the stacker on or off

Setting range: 0 … 2000

Parameter 57: Time how long the holding stamp is down.

Setting range: 0 / 1