Instruction manual

- 35 -
13. To return all settings to the factory settings .......... Function setting [RESET]
(1)
* Enter program mode [R]
([Ļ] + [B] + [C] keys)
(2)
* Program mode [R] will be entered.
(3)
* [RESET] will flicker when the [D] key is held down, and
the reset process will be executed.
(4)
* The data will be set to the factory setting when the [D]
key is pressed over 2 seconds or more, and then the
normal mode will be returned to. (Process is
completed)
Description
A. All settings will be returned to the factory settings when the [D] key is held down for two or more seconds while [RESET] is
displayed. The display will return to the normal mode.
B. To return to the normal mode from the [RESET] display without executing the reset process, press the [Ĺ] key while holding
down the [Ļ] key. In this case, the settings will not be returned to the factory setting.
When this function is set, the contents of all settings to this point will be cleared, and will return to
the factory settings. Please take care when using this function.
Caution