Instruction manual

ManualsBrandsDuerkopp Adler ManualsBusiness equipment1180-5

- 34 -

(3) To check output signal (check in operation)

.......... Function setting [OAD] - [ODD], [OFD], [OPD] - [ORD], [O1D] - [O7D]

(1)

Call out the output signal in program mode [E] to be checked. (In this example, call out [OAD].)

(This can be called with mode call or direct number call. Refer to pages 14 to 16. (Direct call number = "737"))

(2)

*Confirm the display ON during full pedal heeling operation

Be careful to sewing machine operation when

turned ON the signal which the sewing

machine operation relates to.

(3)

Entering the normal mode

For mode call: [Ļ] + [Ĺ]

For direct number call: Set with and then press .

Output signal

(Factory setting)

Display

Thread trimming output (T)

OAD

Wiper output (W)

OBD

Backstitch output (B)

OCD

Thread release output (L)

ODD

Presser foot lifter output (FU)

OFD

O1 output (OT1)

O1D

Output for needle cooler (NCL)

O2D

TF output (TF)

O3D

Description

A. This is useful for setting the various items and checking the operation before connecting the output to the solenoid, etc.

B. Refer to the "Connector Layout" on page 42 for the output terminals, and to the Technical information manual for details on the

output function names.

(4)To check an output terminal (To forcibly turn the output ON without running the sewing machine.)

.......... Function setting [OAO] - [ODO], [OFO], [OPO] - [ORO], [O1O] - [O7O]

(1)

Call out the output signal in program mode [E] to be checked. (In this example, call out [OAO].)

(This can be called with mode call or direct number call. Refer to pages 14 to 16. (Direct call number = "752"))

(2)

* Output signal is turned ON while pressing the [D] key.

Note) While displaying this function, sewing machine can not operate.

(3)