Technical Specifications

ShurTech Product Specification
Project ID: 62
Clean Release Masking Tape
Revision No: 4/4 Revision Date: 2/11/2011 8:32:00 AM
General
Description:
Clean Release Painter’s Tape is a high performance, medium tack tape for use in painting and
general purpose applications. The tape can be applied to glass, vinyl, metal, wood, and painted
wallboard where clean removal is required up to 14 after application. The tape is constructed
with UV resistant acrylic adhesive and backing ideal for applications in direct sunlight. For best
results, the tape edges should be smoothed with firm finger pressure to ensure sharp paint
lines and removal should be at a 45 degree angle immediately after painting. This tape is not
recommended for use on wallpaper, unpainted wall board, ceiling tile or uncured coatings.
Performance
Specification
Value Units Tolerance Test Method
Thickness 5.5 mils -0.5 / +0.6 PSTC-133
180° Peel
Adhesion to
Stainless Steel
20.0 oz/in +/- 6 PSTC-101
90° Quick Stick TBD oz/in TBD PSTC-5
Adhesion to
Backing
7.0 oz/in +/- 3.0 PSTC-101
Tensile Strength 24.5 lb/in +/- 5.5 PSTC-131
Elongation 5.0 percentage minimum PSTC-131
Unwind
Adhesion
0.75 lb/in TBD PSTC-8
Unwind - High
Speed
25.0 oz/in +/- 10.0 PSTC-13
Weight 3.25 oz/yd +/- 0.25 balance
180° Peel
Adhesion to
Painted Drywall
TBD oz/in TBD PSTC-1, modified
Adhesion Build
to Painted
Drywall
TBD oz/in TBD PSTC-1, modified
180° Peel
Adhesion to
Polyethylene
TBD oz/in TBD PSTC-1, modified
Adhesion Build
to Stainless
Steel
TBD oz/in TBD PSTC-1, modified
Water
Repellency
TBD N/A TBD TBD
Paint-Lines /
Edge Seepage
TBD appearance TBD TBD