SDS

Safety Data Sheet
Product Identifier: Manus Bond 64
-
A
EPG
SDS ID: MAN
-
009
____________________________________________________________
Page 3 of 6 Issue Date: 04/17/15 Revision 1.0000 Print Date: 07/04/15
NIOSH:
10 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirable dust)
Mexico
10 mg/m3 TWA LMPE-PPT
20 mg/m3 STEL [LMPE-CT]
Talc (14807-96-6)
ACGIH:
2 mg/m3 TWA (particulate matter containing no asbestos and <1% crystalline silica, respirable
fraction)
NIOSH:
2 mg/m3 TWA (containing no Asbestos and <1% Quartz, respirable dust)
Mexico
2 mg/m3 TWA LMPE-PPT (respirable fraction)
Appropriate Engineering Controls
Based on available information, additional ventilation is not required. Ensure compliance with applicable exposure
limits.
Individual Protection Measures, such as Personal Protective Equipment
Eyes/Face Protection
Wear safety goggles if eye contact is possible.
Skin Protection
Protective clothing is not required under normal conditions.
Glove Recommendations
Protective gloves are not required under normal conditions.
Respiratory Protection
Respiratory protection is not required under normal conditions of use.
Use an approved respirator if exposure limits are exceeded or if irritation develops or persists.
* * *Section 9 - PHYSICAL AND CHEMICAL PROPERTIES* * *
Physical State:
Solid
Appearance:
solid form
Physical Form:
Solid
Odor:
Not Available
Odor Threshold:
Not available
pH:
Not available
Melting Point:
Not available
Boiling Point:
Not available
Flash Point:
Not available
Decomposition:
Not available
Evaporation Rate:
Not available
OSHA
Flammability Class:
Not available
Vapor Pressure:
Not available
Vapor Density (air = 1):
Not available
Density:
Not available
Specific Gravity (water = 1):
1.3 – 1.8
Water Solubility:
Negligible
Log KOW:
Not available
Coeff. Water/Oil Dist:
Not available
KOC:
Not available
Auto Ignition:
Not available
Viscosity:
Not available
VOC:
Not available
Volatility:
Not available
Molecular Formula:
Not available
* * *Section 10 - STABILITY AND REACTIVITY* * *
Reactivity
No reactivity hazard is expected.
Chemical Stability
Stable at normal temperatures and pressure.
Possibility of Hazardous Reactions
Will not polymerize.
Conditions to Avoid
Avoid heat, flames, sparks and other sources of ignition. Avoid contact with incompatible materials.
Incompatible Materials
strong acids, strong bases, strong oxidizing materials