User manual

Technical Documentation - Communication and connection manual: ECU-AIM loggers – Version 1.26
95
ECU_33 EV11_BATTVOLT BATTERY VOLTAGE
ECU_34 EV11_FUEL
ECU_35 EV11_INJECTIME2
ECU_36 EV11_ROC2
ECU_37 EV11_PHASEFLAG
ECU_38 EV11_FUELBURNED FUEL USED
ECU_39 EV11_CORRECTIONFLAG
ECU_40 EV11_LIBRE
“SUBARU – SSM”
This paragraph applies to all Subaru vehicles supporting the SSM (Subaru Select Monitor)
with OBD2 connector (from 1999 to 2007). The number of supported channels may vary
and depends on car model and year of production.
• Connection With AIM Data logger
In order to connect the datalogger to the SUBARU SSM ECU, you need to connect the
AIM GPI01 interface between the AIM system and the ECU as shown below.
SUBARU - SSM
ECU_1 SUBARU_RPM RPM
ECU_2 SUBARU_SPEED VEHICLE SPEED
ECU_3 SUBARU_THROTPOS THROTTLE POSITION
ECU_4 SUBARU_TENGINE COOLANT TEMPERATURE
ECU_5 SUBARU_MAP MANIFOLD PRESSURE
ECU_6 SUBARU_IN_ADVANCE_R