Instruction manual
Table Of Contents
- COVER
- 1. INTRODUCTION
- 2. TABLE OF CONTENTS
- 3. SAFETY PRECAUTIONS
- 4. USAGE PRECAUTIONS
- 5. FEATURES OF THIS MACHINE
- 6. NAMES OF PARTS
- 7. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS
- 8. PRECAUTIONS ON LOADING PAPER
- 9. OPERATIONS
- 10. LOADING PAPER ACCORDING TO COLLATION MODE
- 11. USING THE CONTROL PANEL
- 12. CONNECTING THE DOWNSTREAM UNIT
- 13.DOUBLE-FEED DETECTION FUNCTION
- 14. WHEN BIN ERROR LAMPS LIGHT_BLINK
- 15. WHEN ERROR MESSAGES ARE DISPLAYED
- 15-1. When _No Paper_ is displayed
- 15-2. When _Tray Full_ is displayed
- 15-3. When _Feed error_ is displayed
- 15-4. When _Preset Error_ is displayed
- 15-5. When _Mis-Feed_ is displayed
- 15-6. When _Double Detect_ is displayed
- 15-7. When _Paper Jam_ is displayed
- 15-8. When _Stacker jam_ is displayed
- 15-9. When _Feed Cov. Open_ is displayed
- 15-10. When _Int. Setup Error_ is displayed
- 15-11. When _On-line err_ is displayed
- 16. TROUBLESHOOTING
- 17. TROUBLESHOOTING GUIDE
- 18. LCD MENU
- 19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
- 20. SPECIFICATIONS
51
19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
Cleaning the unit
Ink or paper dust adheres to the paper feed ring or paper separator which feeds paper. Running the unit
in this state will cause paper feed problems. Therefore clean periodically.
1
Press the paper feed shaft in the ar-
row direction, and remove the end
of the paper feed shaft at the joint.
Remove the paper feed shaft.
2
At places which are dirty with ink or
paper dust, wipe off with a cloth
moistened with neutral detergent or
alcohol.
3
Also clean the paper separator of the
bins whose paper feed shaft re-
moved.
Clean after removing the paper feed shaft.
Replacing Expendable Parts
If the paper feed ring or paper separator has worn out, request replacement of parts to your nearest
Duplo dealer.
Paper feed shaft
Joint
Paper feed ring
Paper separator
Paper feed shaft
Joint