Instruction manual

ManualsBrandsDublo ManualsComputer equipmentDFC-10

Table Of Contents

COVER
1. INTRODUCTION
2. TABLE OF CONTENTS
3. SAFETY PRECAUTIONS
4. USAGE PRECAUTIONS
5. FEATURES OF THIS MACHINE
6. NAMES OF PARTS
7. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS
8. PRECAUTIONS ON LOADING PAPER
9. OPERATIONS
10. LOADING PAPER ACCORDING TO COLLATION MODE
- 10-1. Loading paper for normal mode
- 10-2. Loading paper for interleaving mode
- 10-3. Loading paper for alternative mode
- 10-4. Loading paper for block mode
- 10-5. How to load paper when downstream unit is connected
- 10-6. Loading paper according to paper size
11. USING THE CONTROL PANEL
- 11-1. LCD window
- 11-2. Setting the collation mode
- 11-3. Setting the number of interleaves
- 11-4. Setting the count display method
- 11-5. Setting the paper receiving method
- 11-6. Other settings
12. CONNECTING THE DOWNSTREAM UNIT
- 12-1. Connecting the DBM-120 and DBM-120T
- 12-2. Connecting DC-S and DC-S4
13.DOUBLE-FEED DETECTION FUNCTION
14. WHEN BIN ERROR LAMPS LIGHT_BLINK
- 14-1. When an error lamp lights in green
- 14-2. When an error lamp lights in red
- 14-3. When an error lamp blinks in green
- 14-4. When an error lamp blinks in red
15. WHEN ERROR MESSAGES ARE DISPLAYED
- 15-1. When _No Paper_ is displayed
- 15-2. When _Tray Full_ is displayed
- 15-3. When _Feed error_ is displayed
- 15-4. When _Preset Error_ is displayed
- 15-5. When _Mis-Feed_ is displayed
- 15-6. When _Double Detect_ is displayed
- 15-7. When _Paper Jam_ is displayed
- 15-8. When _Stacker jam_ is displayed
- 15-9. When _Feed Cov. Open_ is displayed
- 15-10. When _Int. Setup Error_ is displayed
- 15-11. When _On-line err_ is displayed
16. TROUBLESHOOTING
17. TROUBLESHOOTING GUIDE
18. LCD MENU
19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
20. SPECIFICATIONS

18. LCD MENU

(XX page) Proceed to the corresponding page.

(Indicates blinking display)

(Size cannot be changed if a downstream unit

(DBM-120) is not connected.)

(Page 50)

(Page 49)

(Page 48)