Instruction manual

ManualsBrandsDublo ManualsComputer equipmentDFC-10

Table Of Contents

COVER
1. INTRODUCTION
2. TABLE OF CONTENTS
3. SAFETY PRECAUTIONS
4. USAGE PRECAUTIONS
5. FEATURES OF THIS MACHINE
6. NAMES OF PARTS
7. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS
8. PRECAUTIONS ON LOADING PAPER
9. OPERATIONS
10. LOADING PAPER ACCORDING TO COLLATION MODE
- 10-1. Loading paper for normal mode
- 10-2. Loading paper for interleaving mode
- 10-3. Loading paper for alternative mode
- 10-4. Loading paper for block mode
- 10-5. How to load paper when downstream unit is connected
- 10-6. Loading paper according to paper size
11. USING THE CONTROL PANEL
- 11-1. LCD window
- 11-2. Setting the collation mode
- 11-3. Setting the number of interleaves
- 11-4. Setting the count display method
- 11-5. Setting the paper receiving method
- 11-6. Other settings
12. CONNECTING THE DOWNSTREAM UNIT
- 12-1. Connecting the DBM-120 and DBM-120T
- 12-2. Connecting DC-S and DC-S4
13.DOUBLE-FEED DETECTION FUNCTION
14. WHEN BIN ERROR LAMPS LIGHT_BLINK
- 14-1. When an error lamp lights in green
- 14-2. When an error lamp lights in red
- 14-3. When an error lamp blinks in green
- 14-4. When an error lamp blinks in red
15. WHEN ERROR MESSAGES ARE DISPLAYED
- 15-1. When _No Paper_ is displayed
- 15-2. When _Tray Full_ is displayed
- 15-3. When _Feed error_ is displayed
- 15-4. When _Preset Error_ is displayed
- 15-5. When _Mis-Feed_ is displayed
- 15-6. When _Double Detect_ is displayed
- 15-7. When _Paper Jam_ is displayed
- 15-8. When _Stacker jam_ is displayed
- 15-9. When _Feed Cov. Open_ is displayed
- 15-10. When _Int. Setup Error_ is displayed
- 15-11. When _On-line err_ is displayed
16. TROUBLESHOOTING
17. TROUBLESHOOTING GUIDE
18. LCD MENU
19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
20. SPECIFICATIONS

15. WHEN ERROR MESSAGES ARE DISPLAYED

15-7. When "Paper Jam" is displayed

15-8. When "Stacker jam" is displayed

Paper has jammed in the conveyance route or paper ejection gate.

• Press the Eject key to eject the jammed paper.

• If paper does not come out even when the Eject key is pressed, open the vertical conveyance

cover and remove the jammed paper.

• If paper is jammed at the paper ejection gate, pull out the paper towards the front.

Press the Start key to restart operations.

Paper has jammed at the paper ejection

gate or paper receiving table when the

power was turned ON.

• Press the Eject key to eject the jammed

paper.

• If paper does not come out even when the

Eject key is pressed, open the vertical con-

veyance cover and remove the jammed

paper.

• Check that the lever of the paper ejection

sensor does not remain lowered.

Press the Start key to restart operations.

Conveyance route

Paper ejection gate

Vertical conveyance cover

Paper

Paper Ejection

sensor

Paper