Instruction manual
Table Of Contents
- COVER
- 1. INTRODUCTION
- 2. TABLE OF CONTENTS
- 3. SAFETY PRECAUTIONS
- 4. USAGE PRECAUTIONS
- 5. FEATURES OF THIS MACHINE
- 6. NAMES OF PARTS
- 7. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS
- 8. PRECAUTIONS ON LOADING PAPER
- 9. OPERATIONS
- 10. LOADING PAPER ACCORDING TO COLLATION MODE
- 11. USING THE CONTROL PANEL
- 12. CONNECTING THE DOWNSTREAM UNIT
- 13.DOUBLE-FEED DETECTION FUNCTION
- 14. WHEN BIN ERROR LAMPS LIGHT_BLINK
- 15. WHEN ERROR MESSAGES ARE DISPLAYED
- 15-1. When _No Paper_ is displayed
- 15-2. When _Tray Full_ is displayed
- 15-3. When _Feed error_ is displayed
- 15-4. When _Preset Error_ is displayed
- 15-5. When _Mis-Feed_ is displayed
- 15-6. When _Double Detect_ is displayed
- 15-7. When _Paper Jam_ is displayed
- 15-8. When _Stacker jam_ is displayed
- 15-9. When _Feed Cov. Open_ is displayed
- 15-10. When _Int. Setup Error_ is displayed
- 15-11. When _On-line err_ is displayed
- 16. TROUBLESHOOTING
- 17. TROUBLESHOOTING GUIDE
- 18. LCD MENU
- 19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
- 20. SPECIFICATIONS
38
15. WHEN ERROR MESSAGES ARE DISPLAYED
When errors occur, a warning alarm sounds, and an error message will be displayed on the
LCD.
15-1. When "No Paper" is displayed
15-2. When "Tray Full" is displayed
There is no more paper in the bin.
• Load paper in the bin where the error
lamp is lit in green.
• Check that the paper sensor lever de-
scends when paper is stacked.
Press the Start key to restart operations.
The paper receiving table is full.
• Remove the paper on the paper re-
ceiving table.
1 Pull the stopper 1 to the front.
2 Remove the paper, and return stop-
per 1 to the original position.
Press the Start key to restart operations.
• Check that the full detection sensor
lever does not remain raised.
Paper sensor
Paper
Paper
Full detection sensor