Instruction manual

ManualsBrandsDublo ManualsComputer equipmentDFC-10

Table Of Contents

COVER
1. INTRODUCTION
2. TABLE OF CONTENTS
3. SAFETY PRECAUTIONS
4. USAGE PRECAUTIONS
5. FEATURES OF THIS MACHINE
6. NAMES OF PARTS
7. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS
8. PRECAUTIONS ON LOADING PAPER
9. OPERATIONS
10. LOADING PAPER ACCORDING TO COLLATION MODE
- 10-1. Loading paper for normal mode
- 10-2. Loading paper for interleaving mode
- 10-3. Loading paper for alternative mode
- 10-4. Loading paper for block mode
- 10-5. How to load paper when downstream unit is connected
- 10-6. Loading paper according to paper size
11. USING THE CONTROL PANEL
- 11-1. LCD window
- 11-2. Setting the collation mode
- 11-3. Setting the number of interleaves
- 11-4. Setting the count display method
- 11-5. Setting the paper receiving method
- 11-6. Other settings
12. CONNECTING THE DOWNSTREAM UNIT
- 12-1. Connecting the DBM-120 and DBM-120T
- 12-2. Connecting DC-S and DC-S4
13.DOUBLE-FEED DETECTION FUNCTION
14. WHEN BIN ERROR LAMPS LIGHT_BLINK
- 14-1. When an error lamp lights in green
- 14-2. When an error lamp lights in red
- 14-3. When an error lamp blinks in green
- 14-4. When an error lamp blinks in red
15. WHEN ERROR MESSAGES ARE DISPLAYED
- 15-1. When _No Paper_ is displayed
- 15-2. When _Tray Full_ is displayed
- 15-3. When _Feed error_ is displayed
- 15-4. When _Preset Error_ is displayed
- 15-5. When _Mis-Feed_ is displayed
- 15-6. When _Double Detect_ is displayed
- 15-7. When _Paper Jam_ is displayed
- 15-8. When _Stacker jam_ is displayed
- 15-9. When _Feed Cov. Open_ is displayed
- 15-10. When _Int. Setup Error_ is displayed
- 15-11. When _On-line err_ is displayed
16. TROUBLESHOOTING
17. TROUBLESHOOTING GUIDE
18. LCD MENU
19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
20. SPECIFICATIONS

14. WHEN BIN ERROR LAMPS LIGHT/BLINK

14-3. When an error lamp blinks in green

14-4. When an error lamp blinks in red

No paper has been fed from the bin.

(=Empty feed)

• Fan the paper and restack again, and

then press the Start key to restart

operations.

• If the error occurs again, move the

paper feed pressure adjusting knob

to the left (strong) or move the paper

separation pressure adjusting lever to

the left (separator pressure drops).

Paper has been double-fed in the bin.

• Fan the paper and align the lead edge

of the paper neatly, and then press

the Start key to restart operations.

• If the error occurs again, move the

paper feed pressure adjusting knob

to the right (normal) or move the pa-

per separation pressure adjusting le-

ver to the right (separator pressure in-

creases).

Strong

Normal

Paper feed pressure adjusting knob

Paper separation

pressure adjusting lever

Strong

Paper separation

pressure adjusting lever

Normal

Paper feed pressure adjusting knob

Low

igh