Instruction manual
Table Of Contents
- COVER
- 1. INTRODUCTION
- 2. TABLE OF CONTENTS
- 3. SAFETY PRECAUTIONS
- 4. USAGE PRECAUTIONS
- 5. FEATURES OF THIS MACHINE
- 6. NAMES OF PARTS
- 7. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS
- 8. PRECAUTIONS ON LOADING PAPER
- 9. OPERATIONS
- 10. LOADING PAPER ACCORDING TO COLLATION MODE
- 11. USING THE CONTROL PANEL
- 12. CONNECTING THE DOWNSTREAM UNIT
- 13.DOUBLE-FEED DETECTION FUNCTION
- 14. WHEN BIN ERROR LAMPS LIGHT_BLINK
- 15. WHEN ERROR MESSAGES ARE DISPLAYED
- 15-1. When _No Paper_ is displayed
- 15-2. When _Tray Full_ is displayed
- 15-3. When _Feed error_ is displayed
- 15-4. When _Preset Error_ is displayed
- 15-5. When _Mis-Feed_ is displayed
- 15-6. When _Double Detect_ is displayed
- 15-7. When _Paper Jam_ is displayed
- 15-8. When _Stacker jam_ is displayed
- 15-9. When _Feed Cov. Open_ is displayed
- 15-10. When _Int. Setup Error_ is displayed
- 15-11. When _On-line err_ is displayed
- 16. TROUBLESHOOTING
- 17. TROUBLESHOOTING GUIDE
- 18. LCD MENU
- 19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
- 20. SPECIFICATIONS
35
13.DOUBLE-FEED DETECTION FUNCTION
Switching the double-feed detection sensor between ON/OFF
1
Press the key and display
"Double detect Set".
Press the key and display the
ON/OFF state of the sensor.
2
5
Press the key to save the sen-
sor state.
To redo the setting, press the key an-
other time to return to step 4.
6
Press the key to return to the
standby screen.
Press the key until the standby screen
is displayed.
The sensor number corresponds to the or-
der of the bins from the top in the order of
sensor 1, 2, 3….12. (DFC-10 has up to
sensor 10.)
3
Press the key and select the
sensor whose setting is to be
switched, and press the key.
The screen for selecting sensor ON/OFF
will be displayed.
4
Press the key, and select
the screen where the sensor state
to be selected is blinking.