Instruction manual
Table Of Contents
- COVER
- 1. INTRODUCTION
- 2. TABLE OF CONTENTS
- 3. SAFETY PRECAUTIONS
- 4. USAGE PRECAUTIONS
- 5. FEATURES OF THIS MACHINE
- 6. NAMES OF PARTS
- 7. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS
- 8. PRECAUTIONS ON LOADING PAPER
- 9. OPERATIONS
- 10. LOADING PAPER ACCORDING TO COLLATION MODE
- 11. USING THE CONTROL PANEL
- 12. CONNECTING THE DOWNSTREAM UNIT
- 13.DOUBLE-FEED DETECTION FUNCTION
- 14. WHEN BIN ERROR LAMPS LIGHT_BLINK
- 15. WHEN ERROR MESSAGES ARE DISPLAYED
- 15-1. When _No Paper_ is displayed
- 15-2. When _Tray Full_ is displayed
- 15-3. When _Feed error_ is displayed
- 15-4. When _Preset Error_ is displayed
- 15-5. When _Mis-Feed_ is displayed
- 15-6. When _Double Detect_ is displayed
- 15-7. When _Paper Jam_ is displayed
- 15-8. When _Stacker jam_ is displayed
- 15-9. When _Feed Cov. Open_ is displayed
- 15-10. When _Int. Setup Error_ is displayed
- 15-11. When _On-line err_ is displayed
- 16. TROUBLESHOOTING
- 17. TROUBLESHOOTING GUIDE
- 18. LCD MENU
- 19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
- 20. SPECIFICATIONS
30
12. CONNECTING THE DOWNSTREAM UNIT
7
Press the key to return to the
standby screen.
Press the key until the standby screen
is displayed.
5
Enter the length or width using the
numerical keys.
If any previously registered size of
paper length or width is remaining,
press the
key to clear to " 0 "
first before entering the new num-
ber.
The length and width ranges which can
be registered differ according to the bind-
ing method.
• Saddle stapling / folding
Length: 200 to 450 mm
Width: 200 to 320 mm
• Side stapling
Length: 139 to 231 mm
Width: 200 to 320 mm
• Corner stapling
A4 size ( Length: 210 mm Width: 297 mm )
6
Press the key and register the
value entered at step 5.
Note Values out of the specified range
will not be registered even if en-
tered. If such values are entered,
the display will return to the previ-
ous value. Enter values within the
specified range.
To redo the setting, press the
key and
register the value entered at step 5.