Instruction manual
Table Of Contents
- COVER
- 1. INTRODUCTION
- 2. TABLE OF CONTENTS
- 3. SAFETY PRECAUTIONS
- 4. USAGE PRECAUTIONS
- 5. FEATURES OF THIS MACHINE
- 6. NAMES OF PARTS
- 7. NAMES AND FUNCTIONS OF CONTROL PANEL PARTS
- 8. PRECAUTIONS ON LOADING PAPER
- 9. OPERATIONS
- 10. LOADING PAPER ACCORDING TO COLLATION MODE
- 11. USING THE CONTROL PANEL
- 12. CONNECTING THE DOWNSTREAM UNIT
- 13.DOUBLE-FEED DETECTION FUNCTION
- 14. WHEN BIN ERROR LAMPS LIGHT_BLINK
- 15. WHEN ERROR MESSAGES ARE DISPLAYED
- 15-1. When _No Paper_ is displayed
- 15-2. When _Tray Full_ is displayed
- 15-3. When _Feed error_ is displayed
- 15-4. When _Preset Error_ is displayed
- 15-5. When _Mis-Feed_ is displayed
- 15-6. When _Double Detect_ is displayed
- 15-7. When _Paper Jam_ is displayed
- 15-8. When _Stacker jam_ is displayed
- 15-9. When _Feed Cov. Open_ is displayed
- 15-10. When _Int. Setup Error_ is displayed
- 15-11. When _On-line err_ is displayed
- 16. TROUBLESHOOTING
- 17. TROUBLESHOOTING GUIDE
- 18. LCD MENU
- 19. CLEANING THE UNIT AND REPLACING EXPENDABLE PARTS
- 20. SPECIFICATIONS
29
2
Press the key and display the
screen for selecting custom 1 to 3.
Pressing the key switches be-
tween the screens for selecting custom 1
size, custom 2 size, or custom 3 size.
3
Select the screen of the custom
number to be registered, and press
the key. The screen for setting
the length (L) and width (W) is dis-
played.
Pressing the key switches be-
tween the screens for selecting length and
width.
4
Select the screen for registering the
size, and press the key to switch
between the "Set Length" or "Set
Width" screen.
Screen for registering length
Screen for registering width
Setting custom size
When using paper other than those specified, reg-
ister the length and width of the paper. Three pa-
per sizes can be registered (custom 1, custom 2,
custom 3).
At shipment, A4 size paper length and width are
registered at every custom size.
1
Press the key and display
"Custom size".
12. CONNECTING THE DOWNSTREAM UNIT