Instruction manual

26
11. USING THE CONTROL PANEL
1
Set the "Initial Qty Rpt" screen to ON to repeat the same collation operation with the count down
display method.
The number of sets entered will be memorized and the same collation will be carried out continu-
ously.
At shipment, “Initial Qty Rpt” is set to “ON”.
Press the key to display
"Other settings".
2
Press the key to set the screen
for selecting "Overlap", "Speed",
and “Initial Qty Rpt".
Press the key to display the
"Initilal Qty Rpt" screen, and next press
the
key to display the screen for select-
ing repetition of number of processed sets.
4
Press the key and save the re-
peat operations selected at step 3.
5
Press the key to return to the
standby screen.
Press the key until the standby screen
is displayed.
Setting processed set repeat
3
Press the key to display the
screen where the operation to be set
is blinking.
To redo the setting, press the key an-
other time to return to step 3.
Dot mark
LCD window
NO. OF SETS window
*1
*1: When the processed sets repeat setting is
"ON", a dot mark will be displayed on the
NO. OF SETS window. This dot mark will
not be displayed if the setting is "OFF".
* Initial Qty Rpt ·········· Initial Quantity Repeat