Specifications

LSN (Life Safety Network) Inverter Suggested Specifications
2.13 Maintenance, Service and Enhanced Warranty Plans
The following shall be offered to assure initial and long term viability of the system through additional
maintenance and service plans and/or through enhancements to the standard two-year electronics
limited warranty.
FS Factory Start-Up (FS):
Factory Start-Up shall be supplied as an inverter system standard at no additional cost. The
Factory Start-Up process shall verify correct installation and operation of the inverter system.
Trained, factory-authorized technicians shall administer an on-site, point-by-point check of the
system to include:
●Internal electrical connections ●AC input and Battery connections
●System operating voltages ●System operating parameters
●Initial system “power-up ●Battery discharge test
●Correction of existing deficiencies ●Final testing, calibration and recording
●Training of available operating personnel
____
Monitoring Program (MP):
The unique, optional Monitoring Program shall provide for the continuous monitoring of the
inverter system by the Factory Technical Support Group. All weekly, monthly and annual
system tests shall be reviewed and analyzed for early warning signs of system malfunction.
Any failures shall be automatically relayed to the service department where corrective action
can be recommended to the owner/operator. For activation, a user supplied dedicated analog
phone line must be available.
____ Prev
entive Maintenance Plan (PMP-____):
The Preventi
ve Maintenance Plan shall provide optional warranty system coverage beyond
the standard two-year factory warranty. PMP warranty service excludes the batteries, which
are covered under a separate warranty plan. The purchase of a Fax Modem option shall be
required when a Preventive Maintenance Plan is selected.
Available Preventive Maintenance Plans (Fax Modem Option Required)
PMP-A1: Additional 1-year
warranty and 1-year service
coverage, weekdays, Monday-
Friday, 8AM to 5PM EST.
PMP-A2: Additional 2-year
warranty and 2-year service
coverage, weekdays, Monday-
Friday, 8AM to 5PM EST.
PMP-A3: Additional 3-year
warranty and 3-year service
coverage, weekdays, Monday-
Friday, 8AM to 5PM EST.
PMP-B1: Additional 1-year
warranty and 1-year service
coverage, 24 hours/day,
7 days/week, no holidays.
PMP-B2: Additional 2-year
warranty and 2-year service
coverage, 24 hours/day,
7 days/week, no holidays.
PMP-B3: Additional 3-year
warranty and 3-year service
coverage, 24 hours/day,
7 days/week, no holidays.
PMP-C1: Additional 1-year
warranty and 1-year service
coverage, 24 hours/day, 7
days/week, including holidays.
PMP-C2: Additional 2-year
warranty and 2-year service
coverage, 24 hours/day, 7
days/week, including holidays.
PMP-C3: Additional 3-year
warranty and 3-year service
coverage, 24 hours/day, 7
days/week, including holidays.
If the standard factory warranty has expired before selection and purchase of a PMP plan, an on-site
evaluation shall be scheduled to determine if the system requires parts and/or labor to return to factory
specifications. Parts and labor required shall be charged at additional costs.
0603447 Rev C Page 6 of 8 Rev. 9-23-09