User's Manual

DE-960 User
’s Manual
Version : 1.00
DUALi Inc.
(http://www.duali.com)
13
9.3
Automatic Card Detection Disable
Follow
ing is the communication frame for automatic card detection disable setting
This command controls the automatic card detection function. It is used when controlling DE-960 from
host device like PC.
(9600bps, 8 data, no parity, 1 stop bit)
STX LENH LENL CMD LRC
0x02 0x00 0x01 0xEF 0xEE
9.4
KEY Mode option set
Follow
ing is the communication frame for Key mode setting. Since it is saved in flash memory after the
first setting, the reader does not need to be set again.
(9600bps, 8 data, no parity, 1 stop bit)
STX LENH LENL CMD DAT
A
LRC
0x02 0x00 0x02 0xE3 0x01 DAT
A[1] LENL ^ CMD ^ DATA[0]
( ^ : exc
lusive oring)
9.5
PASS Buffer Length option set
Following is the PASS Buffer communication frame for setting. Since it is saved in flash memory after
the first setting, the reader does not need to be set again.
(9600bps, 8 data, no parity, 1 stop bit)
STX LENH LENL CMD DAT
A
LRC
0x02 0x00 0x02 0xE3 0x02 DATA[1] DATA[2] LENL ^ CMD ^ DATA[0]
( ^ : exclusive oring)
DAT
A[0]
St
ate
Descript
ion
0x00 Direct Mode
+ PIN Input KEY Direct mode – CARD detect & PIN
0x01 Buffer Mode + PIN Input KEY Buffer mode – CARD detect & PIN
0x02 Direct Mode Input KEY Direct mode
0x03 Buffer Mode Input KEY Buffer mode
DAT
A[x]
St
ate
Descript
ion
DAT
A[1] MINIMUM Length Set password minimum length (Range: 1~11)
DAT
A[2] MAXIMUM Length Set password maximum length (Range: DATA[1]~12)