DE-ABCM US ER’S GUIDE Confidential Notation The original copy DE-ABCM USER’S GUIDE DUALi Inc. Document Version: 1.01 Last Revised Date: 27 Dec.
DE-ABCM US ER’S GUIDE Copyright ⓒ 2009 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is co pyrighted an d c ontains co nfidential i nformation a nd other i ntellectual property ri ghts of D UALi Inc. A ny unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property rights. DUALi Inc.
DE-ABCM US ER’S GUIDE Contents 1 SUMMARY ..................................................................................................................... 4 2 STRUCTURE................................................................................................................... 4 3 4 2.1 The Structure of equipment ....................................................................................... 4 2.2 The block diagram of main Module, sub board(Epass12) and antenna .................
DE-ABCM US ER’S GUIDE 1 SUMMARY Smart Card Interface Contactless Smart Card (ISO 14443 A/B), MIFARE, FeliCa 2 SAM CARD (ISO7816, T=0,T=1) Host Interface USB 2.0 Full Speed (12Mbps), also support USB 1.
DE-ABCM 2.2 US ER’S GUIDE The block diagram of main Module, sub board(Epass12) and antenna CPU SAM Socket(SAM1) 2 LEDs SAM Socket(SAM2) PN512 RF IC (U2) (ST-ARM 32-bit Cortex-M3) USB Connector (2mm 4Pin) Antenna 2.3 Description of main Module CPU : 32bit RISC CPU, It is stm32f103 which is ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers. This CPU has 64Kbyte Flash memory, 20Kbyte SRAM, 2 UART, USB 2.0 interface.
DE-ABCM 3 THE DESCRIPTION OF SURFACE 3.1 The picture of device surface There are no parts at bottom. But there is a space for optional LEDs. 3.
DE-ABCM US ER’S GUIDE 4 Connector pin assignment 4.1 USB Connector [J2] (4Pin 2.0mm) -> PC USB Port Pin No. Description 1 VCC(DC5V) 2 USB D+ 3 USB D- 4 GND 5 The Description of electricity 5.1 The Description of power - 5.2 Input power : 5V (USB Bus Powered) The using electric current - Normal 5V , 150 mA under - MAX 5.3 5V , 250 mA under The Description of USB communication - USB V2.0 FULL SPEED (12Mbps) 6 THE DESCRIPTION OF FUNCTION 6.
DE-ABCM US ER’S GUIDE 7 PROPERTY 7.1 Environment to use - Temperature to use : -20 ~ 60 ℃ - Humidity to use : 30 ~ 90 % (relative humidity) 7.2 Environment to keep - Temperature to keep : -20 ~ 80 ℃ - Humidity to use : 30 ~ 90 % (relative humidity) 8 Warning and Notice - For indoor use only. - This product i s affected by an elem ent like m etal o r M agnetism. So one has to tak e precautions. - This device is not waterproof.
DE-ABCM US ER’S GUIDE REGULATORY INFORMATION ● Compliance Statement This device complies with Part 15 of the FCC Rules, and Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
DE-ABCM US ER’S GUIDE Warranty & Service ‣ Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DE-ABCM, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include any shipping charges. ‣ The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component.
