DE-950 User’s Manual DUALi Inc. Document Version: 1.0 Last Revised Date: 25th JAN. 2013 Copyright ⓒ 2011 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products.
DE-950 User’s Manual Revision History 2013.01 (Ver. 1.0) : First Release © Copyright 2000-2011 DUALi Inc. Version : 1.0 3 DUALi Inc. (http://www.duali.
DE-950 User’s Manual CONTENTS 1. Introduction .................................................................................................................................... 5 2. Contents Confirmation ................................................................................................................... 5 3. Hardware Specifications................................................................................................................. 5 4. Installation .....................
DE-950 User’s Manual 1. Introduction DE-930 is refined design of proximity reader which supports Contactless ( ISO 14443 A/B type, Mifare®, FeliCa™ ) and SAM. It also supports 26/32/34/64/66-bit Wiegand format for Host communication which is the most widespread system. DE-950 is IP65 complaint water proof reader and it’s applicable to various systems as Access control system, Time attendance system, Parking management or e-Payment system. 2.
DE-950 User’s Manual 4. Installation 1. Place the wall mount bracket on the wall and fix it tightly with Screw (Φ4mm Flat head) -4nos. 2. Connect the power and communication cable to DE-950’s Terminal Block. (refer to the picture as below) 3. Tilt the device slightly and insert to the wall mount from the top. Fix it tightly with 3*4 Flat head machine screw. Φ4mm Flat head screw 3*4 Flat head machine
DE-950 User’s Manual 5. Connection Diagram Terminal block can be differ by choosing option (RS485 OR Wiegand ). See the table as below PIN Number 7 8 9 10 11 12 1 2 3 4 5 6 Pin No. Name Cable color Description 1 GND_SINGLE BLACK POWER 2 GND_SINGLE BLACK POWER 3 RS232_RX GRAY Comm. RS232 Comm. 4 RX232_TX VIOLET Comm. option 5 RS485_DP BROWN Comm. RS485 Comm. 6 RS485_DM GREEN Comm. option 7 PWR_IN RED POWER POWER 8 WD_DATA0 BLUE Comm.
DE-950 User’s Manual - Wiegand Version : 1.0 7 8 9 10 11 12 RED BLUE YELLOW ORANGE WHITE VIOLET 1 2 NC NC NC NC BLACK BLACK X X X X 8 DUALi Inc. (http://www.duali.
DE-950 User’s Manual 6. Operation & Usage 1. Apply power of the Reader, check the Beep sound of buzzer and RED LED is on. It means this device is ready. 2. When user present (authorized) contactless card to the reader, the reader makes 1 time of Beep sound with blinking Blue LED . It sends Card’s data to Access controller through the Wiegand data line. 3. When user present unauthorized card to the reader, its Red LED will be blinking. 4.
DE-950 User’s Manual 7. Output Format 7-1. Wiegand output format 1. Data format - Data format can be decided by setting(Function Configuration).
DE-950 User’s Manual 8. Function Configuration Following is the Wiegand communication frame for setting It is saved in flash memory. You don’t need setting after first setting. (9600bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD DATA LRC 0x02 0x00 0x02 0xE0 DATA[0] LRC DATA[0] State Description Bit7~4 RFU RFU 0 4byte ID(32 or 34bit) depend on parity setting(No.2) 1 8byte ID(64 or 66bit) depend on parity setting(No.2) 0 Parity Send(34 or 66bit) depend on ID bytes(No.
DE-950 User’s Manual 9. Warning EU This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by DUALi Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC STATEMENT CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
DE-950 User’s Manual 10. Warranty & Service ‣ Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DE-950, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include any shipping charges. ‣ The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component.