User's Manual

ManualsBrandsDuali ManualsElectronicsSMART CARD READER

this document in part or as a whole for any purposes other than those for which this document is disclosed. This

document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.

Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property

rights.

DUALi Inc.

Document Version: 1.0

Last Revised Date: 30 Nov. 2010

DE-630 Hardware User’s Manual

Summary of content (13 pages)

PAGE 1
DE-630 Hardware User’s Manual DUALi Inc. Document Version: 1.0 Last Revised Date: 30 Nov. 2010 Copyright ⓒ 2009 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
PAGE 2
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products.
PAGE 3
DE-630 Hardware User’s Guide Revision History  2010.11.30(Ver. 1.0) : First Release  2011.04.07(Ver. 1.1) : RJ-48 Pin Configuration Change Version : 1.1 3 DUALi Inc. (http://www.duali.
PAGE 4
DE-630 Hardware User’s Guide Contents 1 Summary........................................................................................................................ 5 2 Structure......................................................................................................................... 6 3 4 5 6 7 8 2.1 The Structure of equipment.................................................................................... 6 2.2 The block diagram of DE-630 ................................
PAGE 5
DE-630 Hardware User’s Guide 1 Summary ITEM CPU Program Memory 사양 비고 STM32F103ZCT6 (ARM Cortex_M3, 144pin) ST 256KBytes FLASH (default) On chip Up to 8Mbytes external Flash Option (1M,2M,4M,8M) Data Memory 48KBytes SRAM (default) On chip Up to 8Mbytes external PSRAM Option (1M,2M,4M,8M) DISPLAY 4 Status LED 4 color 128*64 Graphic LCD (Yellow green) Communication RS-232 - default Decide when order RS-485 - optional BUZZER Magnetic Buzzer RF CARD Frequency : 13.
PAGE 6
DE-630 Hardware User’s Guide 2 Structure 2.1 The Structure of equipment - DE-630 itself contains all circuits include antenna, 4 SAM connectors. - User can order RS-232 version or RS-485 version.(Communication Cable is different) (RS-232 or RS-485) POS (Adaptor) (OR) Host PC Version : 1.1 6 DUALi Inc. (http://www.duali.
PAGE 7
DE-630 Hardware User’s Guide 2.2 The block diagram of DE-630 POWER ANTENNA (DC 12V) Buzzer LCD(128*64 graphic) Battery RF CHIP(U9) STM32F103 RC632 4 * 상태 Tamper 48Kbytes SRAM, switch 84bytes Battery backup SRAM Nor Flash 13.56 (256Kbytes Flash, 4 * SAM PSRAM MHz Version : 1.1 12 32.768 MHz kHz 7 RS-232 RS-485 DUALi Inc. (http://www.duali.
PAGE 8
DE-630 Hardware User’s Guide 2.3 Description of main Module - CPU: 32bit RISC ARM core CPU, It is stm32f103 which is ARM-based 32-bit MCU with Flash. This CPU has 256Kbyte Flash memory, 48Kbyte SRAM. - MFRC531 RF IC: This RF IC can control RF card like MIFARE card, type A/B card simultaneously. Version : 1.1 - RS-232 Driver: It’s a Communication part for RS-232 communication. - RS-285 Driver: It’s a Communication part for RS-485 communication. - SAM part: It can control 4 SAMs.
PAGE 9
DE-630 Hardware User’s Guide 3 Description of Surface 3.1 The picture of device surface 3.2 Communication Cable(RS-232 and RS-485) (Connector for RS-232 and RS-485 version) 3.3 Default: RS-232 version  Option1: RS-485 version  Cable assembly from this connector to POS is optional. The size of terminal - Version : 1.1  DE-630 :95(W) * 138(L) * 20(H)mm 9 DUALi Inc. (http://www.duali.
PAGE 10
DE-630 Hardware User’s Guide 4 Connector Pin Assignment 4.1 RS-232 Connector and Cable RJ-48 Pin No. Description 1 DC POWER(DC 12V) 2 DC POWER(DC 5V) 3 TxD(to Host Rx) 4 NC 5 RxD(to Host Tx) 6 NC 7 GND 8 NC To DC Jack To DC Jack DC JACK Diameter = 2mm DC + (12V) Diameter = 6.5mm DC – (GROUND) 4.2 RS-485 Connector and Cable RJ-48 Pin No.
PAGE 11
DE-630 Hardware User’s Guide order. - Its default communication method is RS-232. - DC jack’s connection is same with RS-232 version. Version : 1.1 11 DUALi Inc. (http://www.duali.
PAGE 12
DE-630 Hardware User’s Guide 5 Description of Electricity 5.1 The Description of power - 5.2 Input power1 : 12V Adaptor (higher than 300mA) The using electric current - Normal 12V, 130mA under - MAX 5.3 12V, 200mA under The Description of RS-232 communication - 115200bps, 8 data, no parity, 1 stop bit 6 Description of Function 6.1 Protocol Specification Refer to protocol specification for detail function. ( provide on request) 6.2 Firmware Download Refer download manual.
PAGE 13
DE-630 Hardware User’s Guide EU This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by DUALi Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC STATEMENT CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.