Owner`s manual

.. XML811 0 OPERATION
General Operation
Setup Menu Press and hold AUDIO/MENU for more than 3 seconds to
access the setup menu. then press AUDIO/MENU
to cycle
through menu options. When desired option appears in the
display. rotate the volume knob left/right to adjust
or activate
the desired function.
Menu Exit Press BAND to exit any menu or submenu.
Setup Menu
··'Meftu·F~on,';;
Auto Station
Store
Tuner Frequency
Spacing
Auxiliary
Input
Rear/Sub
RCA output
Loudness
Curve
Clock
Display
Beep Confirmation
Auto Store
Frequency
US
Frequency EU
Auxiliary On
Auxiliary Off
Rear/Sub
Sub
Rear/Sub Rear
Loud Off
Loud
On
Clock Off
Clock
On
Beep Off
Beep On
Press the center SELECT to seek and save 6 strong stations in the cur-
rent band. Note: This option only appears
in Tuner mode.
Programs unit
to USA tuner spacing.
(200kHz for
FM and 10kHz for AM)
Programs unit to European tuner spacing.
(50kHz for
FM and 9kHz for AM)
Enables the rear RCA auxiliary input.
Disables the auxiliary input.
Programs the Rear/Sub
RCA preamp output to rear.
Programs the Rear/Sub
RCA preamp output to subwoofer.
Disables the loudness function.
Enables the loudness function. Activating this feature
will enhance the
bass and treble frequencies when listening to music at low volumes.
Programs unit to not display the clock when the power is off.
Programs unit
to display the clock when the power is off.
Disables the confirmation beep.
Enables the confirmation beep.
Programmable
Tum
On Volume
LocaVDistance
Tuning
Prog-Vol
# Programs unit to turn on at a specific volume
(default is
OFF).
Local Off Activates distance tuning.
Local
On Activates local tuning for strong station reception only.
Message Off Disables power
on message.
Power
on Message 1----=----1------:------=-----------------1
Message On Enables power on message to be displayed.
8
Scrolling
Option
Illumination
Dimmer
Demonstration
Mode
Scroll
Once
Scroll On
Scroll Off
Dimmer High
Dimmer
Mad
Dimmer Low
Demo Off
Demo
On
Programs unit to scroll once. then show the first 10 characters on the
display.
Programs unit
to scroll continuously.
Programs unit
to show the first 10 characters on the display.
Programs unit
to the brightest illumination level.
Programs unit
to the middle illumination level.
Programs unit
to the dimmest illumination level.
Disables the demonstration message.
Enables the demonstration message.