Owner`s manual
..
XML81100PERATION
Bluetooth®
Operation
Overview
Connecting a Bluetooth device requires first installing and connecting the Dual
BTM60
Bluetooth interface module (sold separately). When connected
to
a Dual Bluetooth ready
head unit. the
BTMbO
supports the
HFP
(hands-free profile). A2DP (advanced audio
distribution profile) and
AVRCP
(audio video remote control profile).
Preparation
Before you can use a mobile device with this head unit. it must
be
paired and connected.
Please make sure that Bluetooth is activated
on
your mobile device before you begin the
pairing process. Refer
to
the owner's manual of your mobile device for more details.
Bluetooth Pairing
1)
To
pair a Bluetooth enabled mobile phone to your head unit. press
\.
on
the head unit
or
BTMbO.
or
press
MODE
until
"DUAL_BTMbO"
is displayed.
2)
Press and hold
\.
on
the head unit
or
BTMbO
for 5 seconds. until "PAIRING" is
displayed. the Bluetooth icon
will
flash every second. The head unit
will
begin
to
broadcast the pairing signal for
90
seconds.
3)
Complete the pairing from the Bluetooth menu of your mobile device
by
searching
for new devices. Please refer to your mobile device instructions
for
further information
on
Bluetooth pairing and connections.
The
Bluetooth icon
will
illuminate solid when
connected.
The
BTM60
device
name
is
-DUAL_BTM60.-
The
password for
the
DUAL
BTM60
is
1234.
Paired Devices List
The
XML811
0
will
remember the last 8 devices that were paried.
To
access the list of
previously paired devices. follow these instructions:
• Disconnect any mobile device that may
be
connected
by
pressing""
once.
• Press
DISP
momentarily
to
cycle through the list of 8 previously paired devices.
• When stopped
on
a device number 1-8. wait 5 seconds to see the name of the device.
• If the device is not
in
range of the
BTM60.
"Unknown"
will
be
displayed.
•
Once
the desired device is displayed. press
\.
or
the center select button
to
connect.
Connection Notes
• If
AUTO-CON
is set
to
OFF
you must press
\.
to connect after pairing. and every time
the
XML811
0 is turned
on.
• From Bluetooth standby mode.
press,.,.
to
disconnect your mobile device from the
BTMbO.
If disconnected. press
\.
to
reconnect the mobile device that was connected last
to
the
BTMbO.
Compatibility
•
Due
to
the differences
in
Bluetooth technology. some mobile devices may
be
incompatible or function improperly when used with the
BTMbO.
14