Owner's Manual

m SG3/SG4/SG5 INSTALLATION
Preparation
Protect your marine head unit from damage and the harsh marine environment with the
SG3/SG4/SG5 splash guard. This marine grade cover fits most single DIN size head units
and will protect against splashes and debris.
Before You Start
• Disconnect negative battery terminal. Consult a qualified marine technician or service
manual for instructions.
• Due to differences in head units. it is recommended to temporarily mount head unit in
splash guard before installation to ensure splashguard cover will close properly.
• Use extreme caution when drilling holes to avoid damaging fuel lines or existing wiring.
Cutout Dimensions
I
1.17 inches
30mm
------t 9.031nches t--1 ----1 .
229.40mm
1
2.64 inches
2.00 inches
51 mm
7.80 inches
198mm
...
Opening and Closing the Splash Guard
67mm
I
7/32 Inch
5.2mm
• Press the release button on top to open the cover and access the head unit.
• To close. fold the cover up and press until it clicks into place.
Release Button ~
2