DMS655SM DMS692 DMS652 DMS651 DMS SERIES INSTALLATION/OWNERS MANUAL Marine Speakers MARINE
DMS SERIES PREPARATION Getting Started Thanks for choosing Dual. This manual is designed to provide information for the purchaser of Dual Marine products. Dual has attempted to make sure all the information in this manual is current. But, this information is subject to change without notice. Safety This symbol with “CAUTION” is intended to alert the user to the presence of important instructions. Failure to heed the instructions can result in injury or unit damage.
DMS SERIES INSTALLATION Installation Please Note: This manual covers multiple models. Parts of the following instructions may not apply to your installation. The installation instructions included here are basic. If you feel unsure about personally installing the speaker system. Dual recommends that you seek installation by a qualified sound technician. Before installation, please follow the following rules: 1.
DMS SERIES SPECIFICATIONS Features & Specifications DMS655SM 6.5” SURFACE MOUNT MARINE SPEAKER • Magnetically Shielded •Santopren rubber surround •UV impregnated ABS heat-resistant weatherproof enclosure and Grille • One-piece cast ABS basket • Recommended amplifier power 10-65 watts RMS, 175 watts Peak • Easily converts from surface mount to flush mount Sensitivity: 93dB Frequency Response: 60 Hz – 20 kHz Tweeter: 19 mm Silk Dome Ferrofluid Neo Woofer: 6.
DMS SERIES SPECIFICATIONS Features & Specifications DMS652 6.5” COAXIAL MARINE SPEAKER • Magnetically Shielded • Santopren rubber surround • UV impregnated ABS heat-resistant weatherproof grilles • One-piece cast ABS basket • Recommended amplifier power 10-65 watts RMS, 175 watts Peak • Requires 3.45" of mounting depth and 5.63” cutout diameter Sensitivity: 93dB Frequency Response: 65Hz – 20 kHz Tweeter: 19 mm Silk Dome Ferrofluid Neo Woofer: 6.
DMS SERIES GUIDELINES Guidelines We recommend that you will have the best results by consulting a professional installer, but If choosing to do your own installation, please note the following: • Make sure all moving parts and factory electrical wires are out of your way and will not interfere after installation. • Leave a little slack in the wire to prevent pulling or stretching. • Use adhesive backed tie downs and wire clamps to prevent the wires from getting caught or shorted.
DMS SERIES WARRANTY Limited One-Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Namsung America Inc. warrants this product to the original purchaser to be free from defects in material and workmanship, under normal conditions, for a period of one year from the date of the original purchase.
Namsung America Inc. 21318 64th Ave. South Kent, WA 98032 U.S.A. Toll Free: 1-866-626-7863 ©2003 Namsung America, Inc.
