40” WIDESCREEN LED TV MODEL NO.: DL-TQL40F4-001 USER MANUAL Please read this manual carefully before using, and keep it for future reference.
IMPORTANT INSTRUCTIONS SAFETY INSTRUCTIONS De bliksemschicht met pijl in de driehoek is een waarschuwingsteken dat u attent maakt op “gevaarlijke spanning” binnenin het product. VOORZICHTIG: OM HET RISICO OP EEN ELEKTRISCHE SCHOK TE VERMINDEREN DIENT U HET DEKSEL (OF DE ACHTERKANT) NIET TE VERWIJDEREN. ER BEVINDEN ZICH BINNENIN GEEN DOOR DE GEBUIKER TE REPAREREN ONDERDELEN. LAAT DE SERVICE OVER AAN BEVOEGD PERSONEEL.
● Do not operate this product under the following conditions. - When the power-supply cord or plug is damaged. - If liquid has been spilled into or objects have fallen into the product. - If the product has been exposed to rain or water. - If the product does not operate when used according to the operating instructions. - If the product has been dropped or damaged in any way. ● Do not attempt to service the product; take it to the electronics repair shop of your choice for any servicing or repair.
DISPOSAL OF OLD ELECTRICAL APPLIANCES The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
TABLE OF CONTENTS GETTING STARTED IMPORTANT INSTRUCTIONS...................................................................................1-3 ACCESSORIES……….......................................................................................................3 FEATURES....................................................................................................................5 GENERAL PARTS..............................................................................................................
FEATURES 40" LED Display This unit has a built-in 40” LED display window to provide clear vision and low radiation.
GENERAL PARTS MAIN UNIT Front View 1. LED display screen 2. Remote control sensor / Power indicator- In standby mode the indicator light will display red color; when switching on the unit the indicator light will display blue color. 3. Stand holder 4. VOL +/- button- To increase/decrease the volume level or move left/right. 5. CH +/- button- To select next/previous channel or move up/down. 6. MENU button- To enter menu setting page. 7. SOURCE button- To select the input source. 8.
GENERAL PARTS Back View 1. Power input 2. HDMI1/HDMI2/HDMI3 input terminal 3. VGA input terminal 4. PC AUDIO input terminal 5. SCART input terminal 6. EARPHONE output terminal 7. CI input terminal 8. Mini AV input terminal 9. Mini YPbPr input terminal 10. COAXIAL output terminal 11. USB input terminal 12. RF input terminal- To connect the external antenna. 13.
REMOTE CONTROL 1. POWER: To set the unit in standby mode; press it again to switch it on. 2. MUTE: To mute the sound. 3. AUTO: To adjust the screen automatically in PC/VGA mode. 4. NUMBER BUTTONS (0-9): To input the number information, such as channel number and so on. 5. -/--: To switch the digit. 6. : To return to previous channel. 7. ASPECT: Press this button repeatedly to select desired aspect ratio of screen. 8. AUDIO: To select different soundtrack. 9. VOL +/-: To turn up/down the volume. 10.
REMOTE CONTROL 29. SUBTITLE: To open the subtitle. Press it again to close subtitle. 30. TV/RADIO: To switch the unit between TV and radio. 31. INDEX U: To enter index page. 32. SIZE: To switch teletext size. 33. SUBPAGE: To enter the subpage of teletext. 34. REVEAL: To hide teletext, or display hidden characters. 35. MEDIA: To enter MEDIA mode directly. 36. : To play or pause playing; press this button to start time shift in DTV mode. 37. : To move fast forward. 38. : To move fast backward. 39.
REMOTE CONTROL PREPARATION BATTERY INSTALLATION Install the batteries as the following pictures. Be sure + and – terminals are positioned as indicated in the battery compartment (Fig1). SERVICE LIFE OF BATTERIES - The batteries normally last for one year although this depends on how often the remote control is used. - If the remote control fails to work even when it is operated near the player, replace the batteries. - Use two size AAA dry batteries.
BASIC CONNECTION ● Ensure all the cables are disconnected from the main unit before connecting to AC power source. ● Read through the instructions before connecting other equipments. CONNECTING TO AC POWER SOURCE Main unit To power outlet CONNECT EXTERNAL ANTENNA TO UNIT Install external antenna into antenna jack for best picture.
HDMI CONNECTION Use HDMI cable to connect the unit with other devices to receive HDMI cable (Not included) high-definition multimedia signal. Back of DVD/VCR PC/VGA CONNECTION Audio cable (Not included) VGA cable (Not included) Back of PC Use VGA cable and Audio cable to connect the unit with TV or PC, and use this product as a monitor.
SCART CONNECTION SCART cable (Not included) Back of DVD/VCR COAXIAL CONNECTION Use coaxial cable to connect the unit with amplifier or other audio decoding devices for coaxial audio signal output. (Coaxial cable is not included.
AV (COMPOSITE VIDEO) CONNECTION For basic connection, use the composite Audio L/R (white/red) and CVBS (yellow) cable to connect the unit with other devices.
USB CONNECTION (TV) Insert a USB memory device into USB slot for multimedia files playback and recording digital programs.
MAKE SURE ALL THE EQUIPMENTS AND POWER CORD ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE KINDS OF OPERATIONS. BASIC OPERATIONS - Press POWER button on the unit or remote control to power ON the unit (indicator will glow blue); press it again to power OFF (standby mode) the unit (indicator will glow red). - Press SOURCE button on the unit or remote control to switch the unit to DTV or ATV mode. SELECT DESIRED PROGRAM 1. Press CH+ button to play next channel. 2.
SLEEP TIME SETTING - Press SLEEP button on remote control repeatedly to select SLEEP TIME directly. Available options: Off, 10 Mins, 20 Mins, 30 Mins, 60 Mins, 90 Mins, 120 Mins, 180 Mins, 240 Mins. VIDEO SIZE SETTING - Press ASPECT button on remote control repeatedly to select VIDEO SIZE directly. Available options: Auto, 4:3, 16:9, Zoom1, Zoom2. NOTE: If there’s no signal, pressing ASPECT button will not work. And the available video size may be different for different input source.
- Press UP/DOWN navigation button to select preferred channel. - Press LEFT/RIGHT navigation button to switch between left column and right column. - Press RED button to switch between weekly mode and daily mode. - Press YELLOW button to display the TV guide of previous day. - Press BLUE button to display the TV guide of next day. FAVORITE LIST When viewing an available channel, press FAV button on remote control to enter Favorite List menu page.
RECORDER (FOR DTV MODE ONLY) - Insert your USB memory device into USB slot first. When watching a digital program: - Press ● button on remote control to start recording directly and press it again to call out below menu. - Use LEFT/RIGHT navigation button to move the cursor; use number buttons to input your desired value and press OK button to confirm your setting. - Press button on remote control to call out a dialog box, and select OK to stop recording; select Cancel to dismiss the dialog box.
MEDIA PLAYBACK - Press SOURCE button on the unit or remote control to set the unit in MEDIA mode. - Insert a USB memory device into USB slot before following operations. - Press UP/DOWN/LEFT/RIGHT navigation button to move the cursor. - Press EXIT button to return to previous menu page. NOTE: Press MEDIA button on remote control to enter MEDIA mode directly. 1. Photo - Press LEFT/RIGHT navigation button to select Photo in the main menu and press OK button to enter it.
- Press OK button to add/remove highlighted file from play list. - Press button to start playing. During photo normal playing: - Press OK button on remote control to display the tool bar; press EXIT button to hide it. - Press LEFT/RIGHT navigation button to select preferred option in the tool bar and press OK button to confirm selection/enter submenu. - Press - Press - Press - Press button on remote control to play or pause playing. button on remote control to stop playing.
During music normal playing: - Press LEFT/RIGHT navigation button to select preferred option in the tool bar and press OK button to confirm selection/enter submenu. - Press BLUE button on remote control to close the on-screen display; press any button on remote control to display it again. - Press button on remote control to play or pause playing. - Press button on remote control to stop playing. - Press button on remote control to move fast backward. - Press button on remote control to move fast forward.
- Use navigation buttons to select preferred file. - Press RED button to enter a dialog box, and select Yes to delete highlighted file; select No to cancel this operation. - Press GREEN button to add/remove all the files from play list. - Press OK button to add/remove highlighted file from play list. - Press button to start playing. During movie normal playing: - Press OK button on remote control to display the tool bar; press EXIT button to hide it.
- Use navigation buttons to select preferred file. - Press RED button to enter a dialog box, and select Yes to delete highlighted file; select No to cancel this operation. - Press GREEN button to add/remove all the files from play list. - Press OK button to add/remove highlighted file from play list. - Press button to start playing. During e-book normal playing: - Press RED button on remote control to add/remove current page from Bookmark List. - Press GREEN button on remote control to enter GOTO mode.
MAIN MENU ● The unit contains different setting menus. Once the initial programming is entered, it will be remained in the memory until change, and the unit can always be operated under the same conditions. ● The settings will be remained in the memory until the settings are changed, even after setting the player to standby mode. Common procedure for initial settings - Press MENU button on the remote control to display the main menu. - Press UP or DOWN navigation button to select submenus.
Setup 3 - Press UP/DOWN navigation button to select desired menu language. - Press OK button to confirm selection and turn to next page. Setup 4 - Press UP/DOWN navigation button to select desired auto power off time. - Press OK button to confirm selection and turn to next page. Setup 5 - Press UP/DOWN navigation button to select desired searching type. - Press OK button to confirm selection and then this unit will search programs automatically.
DTV MODE - Press SOURCE button on the unit or remote control to select DTV input source. 1. Picture 1.1 Picture Mode Available options: Standard, Mild, User, Dynamic. 1.2 Brightness The brightness value of picture can be adjusted from 0-100. 1.3 Contrast The contrast value of picture can be adjusted from 0-100. 1.4 Sharpness The sharpness value of picture can be adjusted from 0-10. 1.5 Colour The colour saturation value of picture can be adjusted from 0-100.
1.8 Aspect Ratio - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation button to select preferred option. Available options: Auto, 4:3, 16:9, Zoom1, Zoom2. NOTE: If there’s no signal, pressing ASPECT button on remote control will not work. And the available video size may be different in different input source. 1.9 Noise Reduction This item is used to eliminate the image noise to gain better image effect. Available options: Off, Low, Middle, High. 2. SOUND 2.
2.6 AVL (Auto Volume Level) This item is used to turn on/off AVL function. 2.7 SPDIF This item is used to select desired SPDIF audio output type. Available options: Off, PCM, Auto. 3. Channel 3.1 Channel Management - Press UP/DOWN navigation button to select this item and press OK or RIGHT navigation button to enter submenu. - Press UP/DOWN navigation to select preferred program. a) Press RED button on remote control and use number buttons to input the password.
b) Press GREEN button on remote control and use number buttons to input the password. Then press GREEN button to lock/unlock a program. c) Press YELLOW button on remote control to add/remove skip mark. d) Press BLUE button on remote control to enter MOVE mode. Then use UP/DOWN navigation button to select preferred position and press OK button to move it. e) Press UP/DOWN navigation to select preferred program. Then press OK button to enter Rename menu page.
- Press UP/DOWN navigation to select preferred program. a) Press RED button on remote control to add highlighted channel to Favorite 1 list. b) Press GREEN button on remote control to add highlighted channel to Favorite 2 list. c) Press YELLOW button on remote control to add highlighted channel to Favorite 3 list. d) Press BLUE button on remote control to add highlighted channel to Favorite 4 list. 3.3 Country This item is used to select the country that you are living in. 3.
3.51 Channel - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation button to select preferred program. 3.52 Frequency (KHz) - Press OK or RIGHT navigation button to enter submenu. - Press LEFT/RIGHT navigation button to move the cursor; press number buttons on remote control to input desired value. 3.53 Bandwidth (MHz) - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation button to select preferred bandwidth. Once the settings of part 3.
3.65 Color System - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation button to select preferred color system. Available options: Auto, PAL, SECAM. 3.66 Sound System - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation button to select preferred sound system. Available options: BG, DK, I, L, L’. NOTE: The Sound System options may vary due to different Color System settings. 3.
4.11 Lock Channel This item is used to turn on/off Lock Channel function. 4.12 Parental Guidance - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation button to select preferred option. Available options: Off, 4 to 18. 4.13 Change Pin Code - Press OK or RIGHT navigation button to enter submenu. - Input the Old Password, New Password, and Confirm New Password in turn. After that, this unit will save the new password automatically.
4.14 Hotel Mode - Press OK or RIGHT navigation button to enter submenu. - Press UP/DOWN navigation button to select desired item. - Press LEFT/RIGHT navigation button to adjust the value. - Press OK or RIGHT navigation button to enter submenu. - Press MENU button to return to previous page. Warm Tip: We strongly advise that you use Hotel Mode in hotels and you should just ignore it if take this TV for home use only. Hotel Lock: Turn on/off Hotel Lock. Channel Lock: Turn on/off Channel menu lock.
4.3 Clock - Press OK or RIGHT navigation button to enter submenu. - Press UP/DOWN navigation button to select preferred item. 4.31 Date When auto searching is done, this unit will get the date from the signal and save it automatically. 4.32 Time When auto searching is done, this unit will get the time from the signal and save it automatically. 4.33 Time Zone - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation button to select preferred option. 4.
4.6 Hearing Impaired This item is used to turn on/off Hearing Impaired function. For Hearing Impaired users, this function can assist them to know a certain scene or action through the caption, instead of hearing it. NOTE: Hearing Impaired function works only when you are viewing programs that contain related caption information. 4.7 CI Info This item is used to display the CI information. 4.8 PVR/Timeshift - Press OK or RIGHT navigation button to enter submenu.
4.81 Partition Select - Press OK or RIGHT navigation button to enter submenu. - Press RED button to enter a dialog box and then select OK to format your USB memory device. - Press GREEN button to set default partition. 4.82 Auto Timeshift This item is used to turn on/off Auto Timeshift function. 4.83 Timeshift Buffer This item is used to select desired time shift buffer duration. Available options: Auto, 30Mins, 1hr, 2hr. 4.84 Timer - Press OK or RIGHT navigation button to enter submenu.
- Press RED button on remote control to delete highlighted option. - Press GREEN button on remote control to delete all. - Press BLUE button on remote control to enter Edit page. - Press YELLOW button on remote control to enter Add page. Recorder: Turn on/off Recorder. Type: Select your recording type: DTV, Radio. Channel: Select a channel you want to record. Start Time: Set the recording start time. Duration: Set the recording duration. Date: Set the date of recording. Mode: Set the recording mode.
- Press UP/DOWN navigation button to select recorded files and press OK button to start playback. 4.86 Recorder Start This item is used to start recording when watching an available digital program. NOTE: Before recording, insert your USB memory device into USB slot first. 5. Setup 5.1 OSD Timer - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation button to select preferred option. Available options: 5/10/15/20/25/30 Seconds and Never. 5.
5.6 Reset TV Setting This item is used to reset to factory default settings. 5.7 Software Upgrade This item is used to upgrade the TV software through USB memory device. ATV AND OTHER MODES - Press SOURCE button on the unit or remote control to select desired input source. - For these modes, please refer to the menu operations of DTV mode. PC MODE - Connect a personal computer to this unit. - Power on your computer and this unit.
3. V Position This item is used to adjust the value of vertical position (available range: -16 to 16). 4. Phase This item is used to adjust the picture apply to the TV (available range: 0 to 100). 5. Clock This item is used to adjust the signals transfer speed (available range: 50 to +50). NOTE: For other menus, please refer to the menu operations of DTV mode.
MAINTENANCE ● Be sure to press POWER button to set the player to the standby mode and disconnect the power plug before maintaining the player. ● Wipe the player with a dry, soft cloth. ● If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth. ● Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust.
STAND INSTALLATION Your TV is packaged with the Stand and the Cabinet separated. Before enjoying this TV, please carry out the Stand Installation according to the instructions below. Step 1 Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged. Step 2 Align the Stand with TV bottom and then force the end of stand until the TV is fully seated on the stand. Step 3 Tighten the included screws with a screw driver.
SPECIFICATIONS Display Device Resolution Pixel Pitch Luminance Contrast Ratio Aspect Ratio Response Time Viewing Angle 40 inch LED TV 1920×1080 0.46125(H)×0.15375(V) mm 250 cd/m2 5000:1 16:9 10 ms (Max. 16) 178(H)/178(V) Visible Range 886.
GENERAL TROUBLESHOOTING Check the following points before assuming malfunctions of this unit: Symptom[COMMON] No power. No picture. ● No sound. ● Distorted sound. No operations can be performed with the remote control unit. No key operation (by the main unit and/or the remote control unit) is effective. Symptom[TV] No or poor picture. No sound or poor sound. Noise or other interface. Remedy Insert the power plug securely into the power outlet. Ensure that the equipment is connected properly.
