Specifications

ATI Audio Inc. ■ Tel: [phone] ■ Fax: [phone] ■ [e-mail] ■ www.
audio.com
TECHNICAL SPECIFICATIONS
OUTPUT CLIPPING LEVEL +24dBm @ 600 ohms load
DISTORTION .2% maximum THD, 20-20kHz @+24dBm
output and input levels to +24dBm
FREQUENCY RESPONSE ±.25dB, 20 to 20kHz; -3dB at 100 kHz
OUTPUT NOISE -70dBm maximum @ 20kHz measurement
bandwidth, 600 ohm source impedance and max
gain
HUM REJECTION 80dB for common mode hum
INPUT IMPEDANCE Balanced differential inputs, 30,000 ohms
bridging. +24dBm maximum input level
GAIN 26dB, front panel adjustable
OUTPUT ISOLATION 70dB minimum at 1 kHz, any output to any other
output; unit will tolerate up to two shorted
outputs with no reduction in headroom
POWER 115VAC, 47-63 Hz
230VAC, 47-63 Hz with internal wiring change
SIZE 8.5" (21.6cm) W x 1.75" (4.4cm) H x 7"
(17.8cm) D
WEIGHT 2.5 lbs. (1.1kg) Net, 4 lbs. (1.8kg) Shipping
MOUNTING Suction feet for non-slip desk mounting
Rack mount system P/N 21075-501 mounts up to
two units in one rack
1/2RU Filler Panel P/N 21098-501