Specification Sheet

transfer circuit and lamps. Conducts automatic 1-minute self-test every
28 days and a 30-minute self-test every 6 months. Automatic transfer for
brownout conditions and 15-minute retransfer delay. Test switch allows
for initiation of a 1, 5, 30 or 60-minute system check. Routine discharge
cycles insure optimum battery performance. Meets UL standards for
self-testing.
Battery
Maintenance-Free Lead Calcium or Nickel Cadmium with battery recharge
per UL time standards.
Operating Temperature
Standard Models: 20ºC to 30ºC (68ºF to 86ºF)
Damp Models: 10ºC to 40ºC (50ºF to 104ºF)
Dual-Lite • www.dual-lite.com
A Hubbell Lighting, Inc. brand with representatives’ offices in principal cities throughout North America.
Copyright© Hubbell Lighting, Inc., All Rights Reserved • Specifications subject to change without notice. • Printed in U.S.A. 0603445 B 8/10
DIMENSIONS
SPECIFICATIONS
LM Series
High Capacity Emergency Lighting Unit
UNIT CAPACITY SELECTOR
Standard Models DC
Volts
Standard
Lamp
Enclosure
Style
Remote
Capacity
Total Watts For:
1½ Hours 2 Hours 3 Hours 4 Hours
LM2 6 5.4W 1 No 10.8 -- -- --
LM16 6 7.2W 1 No 16 -- -- --
LM33 6 7.2W 1 Ye s 33 25 17 13
LM40 6 7.2W 1 Ye s 40 31 21 16
LM66 6 7.2W 2 Ye s 66 51 35 27
LM80 6 7.2W 2 Ye s 80 62 43 33
LM130 6 7.2W 2 Ye s 130 101 70 54
LM40-12V 12 7.2W 1 Ye s 40 31 21 16
LM66-12V 12 7.2W 2 Ye s 66 51 35 27
LM80-12V 12 7.2W 2 Ye s 80 62 43 33
LM130-12V 12 7.2W 2 Ye s 130 101 70 54
Damp Location Models DC
Volts
Standard
Lamp
Enclosure
Style
Remote
Capacity
Total Watts For:
1½ Hours 2 Hours 3 Hours 4 Hours
LM28D 6 7.2W 1 Ye s 28 21 15 11
LM34D 6 7.2W 1 Ye s 34 26 18 14
LM56D 6 7.2W 2 Ye s 56 43 30 21
LM68D 6 7.2W 2 Ye s 68 53 36 28
LM112D 6 7.2W 2 Ye s 112 87 60 47
Lm34D-12V 12 7.2W 1 Ye s 34 26 18 14
LM56D-12V 12 7.2W 2 Ye s 56 43 30 21
LM68D-12V 12 7.2W 2 Ye s 68 53 36 28
LM112D-12V 12 7.2W 2 Ye s 112 87 60 47
Nickel Cadmium Models DC
Volts
Standard
Lamp
Enclosure
Style
Remote
Capacity
Total Watts For:
1½ Hours 2 Hours 3 Hours 4 Hours
LM15N 6 7.2W 1 No 14.4 -- -- --
LM30N 6 7.2W 1 Ye s 30 25 17 13
LM50N 6 7.2W 1 Ye s 50 42 29 22
LM50N-12V 12 7.2W 1 Ye s 50 42 29 22
LM100N-12V 12 7.2W 1 Ye s 100 85 59 46
City of Chicago Models DC
Volts
Standard
Lamp
Enclosure
Style
Remote
Capacity
Total Watts For:
2 Hours 3 Hours 4 Hours
LM24CH 6 12W 1 No 24 -- --
LM36CH 6 12W 1 Yes 36 -- --
LM36CH-12V 12 12W 1 Yes 36 -- --
Enclosure
Style
A B C D E F
1
20 Ga. (.036")
3
7
/
8
"
9.8cm
5¾"
14.6cm
11½"
29.2cm
13½"
34.3cm
15¾"
40.0cm
25"
63.5cm
2
18 Ga. (.048")
4¾"
12.1cm
7¾"
19.7cm
13½"
34.3cm
15¾"
40.0cm
18"
45.7cm
27¼"
69.2cm
Standard Lamps
LM2 provided with 5.4 watt incandescent PAR 36 sealed beam type lamps,
all others with 7.2 watt incandescent PAR 36 sealed beam type lamps in
6 or 12VDC.
Electronics
Dual voltage input of 120/277VAC, 60 Hz. Includes a fully automatic
constant voltage, current limited charger with transformer isolation and low
battery voltage disconnect. Transfer contact through electric relay. Power
distribution made with fused leads through internally located distribution
board. Maximum power consumption of 20 watts (all models). Test initiated
by means of integral test switch. AC-on indicated by LED. AC lock out
provision prevents discharge of battery at installation until power is present.
Optional Spectron® Self-Test/Self Diagnostics
Provides automatic flashing fault detection for battery, charger,
A
B
C
D
E
F