Specification Sheet

EZ-2
™
Series
Emergency Lighting Units
DIMENSIONS
 
 
 
EZ-2
SPECIFICATONS
Electronics
Dual-voltage input of 120/277VAC, 60 Hz. with isolation transformer. Fully automatic constant voltage current limited charger which includes low
voltage disconnect to prevent deep discharge of the battery. Includes maintenance-free lead calcium battery.
Standard Features
External push-to-test switch and AC-on indicator•
Battery re-charge per UL time limits•
Low voltage disconnect•
Conduit entry knock-out located at the top center•
Electronics
Self-diagnostics monitors lamp status, lamp load transfer circuit and •
battery capacity and displays any fault detection by means of a flashing code
Self-Test feature automatically runs a peiodic emergency test to ensure •
proper operation. Multi-color LED indicator provides visible fault detection
and charging status
User initiated 1, 5, 30, or 60-minute system test feature•
15 minute re-transfer delay•
Temperature compensated charger•
AC Lock-out circuit•
Automatic unit transfer in brown-out conditions(exceeding 20% of nominal)•
Operating Temperature Range
Standard Models: 68°F to 86°F (20° to 30°C)
Damp Location Model: 32°F to 104°F (0° to 40°C)
Weight
4.5 lbs.
Dual-Lite • www.dual-lite.com
A Hubbell Lighting, Inc. brand with representatives’ ofces in principal cities throughout North America.
Copyright
©
Hubbell Lighting, Inc., All Rights Reserved • Specications subject to change without notice. • Printed in U.S.A. 0600653 B 7/11
ACCESSORIES (order separately)
VRS
Vandal resistant shield
VRS-4X
Vandal resistant shield with
neoprene gasket
WGEL
Wire guard
1. High-impact, UV stable thermoplastic housing
2. Maintenance-free battery
3. Environmentally coated, solid-state charger
4. Pilot light and test switch
5. Nylon hinges free hands for easier installation
6. Snap-together construction
7. Universal transformer (120/277VAC operation)
8. Surface wiring knockout
9. Mounting plate
10. Universal mounting pattern
11. Keyhole wall mounting slots
12. Recessed lighting head assemblies
8.
7.
12.
3.
6.
9.
11.
10.
1.
4.
2.
5.
VRS