User manual

DTS Broadcast PDH Microwave Digital Radio User Manual
-36-
5.5.5 Transmit Frequency
• Use the and _keys on the IDU until the panel display “ ”,
press ENT.
• Use the
keys on the IDU to select T menu, press ENT.
• Use the
, and _ keys on the IDU to select the required transmit frequency Channel.
• Press ENT to set the transmit frequency Channel.
• The IDU will display the new setting.
Note: The T-R spacing is set in the channel plan installed in the factory so that receiver frequency
changes to track the transmitter; therefore, changing frequency on one end of the link automatically
changes the frequency at the other end of the link.
5.5.6 Transmit Power
• Use the and _keys on the IDU until the panel display “ ”,
press ENT.
• Use the
keys on the IDU to select “dBm” menu, press ENT.
• Use the
.keys on the IDU to select the required transmit power.
• Press ENT to set the transmit power.
• The IDU will display the new setting.
• Use the
keys on the IDU to select “OFF/ON” menu, press ENT.
• Use the . and . keys on the IDU to select ON.
• Press ENT to set the transmit power is ON.
• The IDU will display the new setting.