User`s manual

9
DELTA 12
8.4- Risk of fire
Each fixture produces heat and must be installed in a well-ventilated place. The minimum recommended
distance from flammable material is 1 MT.
Minimum distance from the object being illuminated is 1 MT.
8.5- Forced ventilation
You will note, on inspection, that the unit features various air inlets and cooling fans located on the head
of the fixture. These should, under no circumstances, be blocked or obstructed whilst the projector is in
operation.
Doing so could cause the fixture to seriously overheat thereby compromising its proper operation.
8.6- Ambient temperature
The projector should never be installed in places that lack a constant air flow.
The ambient temperature should not exceed 40°C.
Prior to connecting the unit to your mains supply, ensure that the model in your possession correctly
matches the mains supply available.
9- MAINS CONNECTION:
DELTA 12 can operate at 90-260 V AC / 50 or 60 Hz.
For connection purposes, ensure that your plug can support 6 amps at 110V and 3 amps at 230V each
unit connected.
Strict adherence to regulatory norms is strongly recommended.
9.1 Protection:
The use of a thermal magnetic circuit breaker is recommended for each DELTA 12.
A good earth connection is essential for the correct operation of the projector.
1M
F
!
Electronic power supply
90-260 V AC / 50-60 Hz
MAINS
FUSE: 6,3A T
DMX IN / OUT
03.LDF006.F08 03.LDF006.FW08
03.LDF006.F12 03.LDF006.FW12
03.LDF006.F25 03.LDF006.FW25
03.LDF006.F45 03.LDF006.FW45
03.LDF006.F12WS (WIRELESS DMX READY)
03.LDF006.F25WS (WIRELESS DMX READY)
03.LDF006.F45WS (WIRELESS DMX READY)
Electronic power supply
90-260 V AC / 50-60 Hz
MAINS
FUSE: 6,3A T
DMX IN / OUT
Panel connector for
external WIRELESS DMX Antenna
Metal support for
external WIRELESS DMX Antenna