User`s manual

DELTA 12

.7- VOLTAGE AND FREQUENCY:

DELTA 12 can operate at 90-260 V AC / 50 or 60 Hz.

8- INSTALLATION:

8.1 Safety cable:

DELTA 12 may be either floor or ceiling mounted.

For floor mounting installations, the unit is supplied with four rubber mounting feet on the base.

For ceiling mounted installations, we reccommend the use of appropriate clamps to fix the unit to the

mounting surface.

The supporting structure from which the unit is hung should be capable of bearing the weight of the

unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to

move or shake whilst the DELTA 12 is moving.

The DELTA 12 is fitted with 7 fixing points on the bottom used to attach accessories (clamps, hooks,

etc.)

We recommend the use of a safety cable or chain connected to the DELTA 12 and to the suspension

truss in order to avoid the fixture accidentally falling should the main fixing point fail.

Make sure that the iron cable or chain can bear the weight of the entire unit.

You may attach the safety chain to the holes located on the base of the fixture.

8.2- Protection against liquids

If IP 65 protection is impaired for any reason, do not expose this product to external atmospheric

agents, because it could be damaged.

8.3- Movement

The projector has a maximum movement of 90° for Tilt.

Do not place any obstructions in the path of the projector's movement.

90°

WARNING

Do not place any object in the path

of the projector’s movement