Datasheet
Table Of Contents
- Pagina 1
- Pagina 2
- Pagina 3
- Pagina 4
- Pagina 5
- Pagina 6
- Pagina 7
- Pagina 8
- Pagina 9
- Pagina 10
- Pagina 11
- Pagina 12
- Pagina 13
- Pagina 14
- Pagina 15
- Pagina 16
- Pagina 17
- Pagina 18
- Pagina 19
- Pagina 20
- Pagina 21
- Pagina 22
- Pagina 23
- Pagina 24
- Pagina 25
- Pagina 26
- Pagina 27
- Pagina 28
- Pagina 29
- Pagina 30
- Pagina 31
- Pagina 32
- Pagina 33
- Pagina 34
- Pagina 35
- Pagina 36
13- DISPLAY FUNCTIONS
ENTER
ENTER
MENU
Up-Down
REC MODE
In DMX Recorder Mode,it is
possible to create and store the
scenes of the ChPr by using an
external DMX controller.
The unit must be set to 9 DMX
channels MODE
DMX Recorder Mode
For the programming of ChPr by using a DMX controller, besides the 9 channels necessary to control the unit a further 3 DMX channels are
needed.
So that in RECORDER mode ( via DMX) the unit will need 12 channels to be correctly programmed.
The three new DMX channels are:
DMX channel 10 = SCENES channel
From 0-10 = no function ( r001)
From 11-255 are displayed the programmable scenes (max 16 scenes from M001 to M0016 )
DMX channel 11 = EDIT channel:
-From 0-19 = no function
-From 20-234 the unit runs the configuration given by the received input DMX values.
With the channel SCENES it is possible to pass from one step to the next while with REC it is possible to record the selected scene.
-From 235-255 the unit runs the configuration given by the received input DMX values closing the sequence as last scene.
With the channel REC it is possible to record the selected scene as last scene.
DMX channel 12 = RECORDING channel
Records the set scene with a variation between 0 to 255 (the display flashes indicating that the scene has been recorded).It is advised that you
keep the REC channel set to 0 and to run through the 255 only once you have decided to save the scene. If ChPr is not closed, by indicating the
last scene ( Edit channel between 235-255), in playback mode all 16 scenes will be played through even if not programmed
Up-DownENTER
ENTER
MENU
Up-Down
ENTER
SLAVE MODE
Slave mode for ChPr program.
All slave units will be synchronised with
master unit (Speed and wait time) but
running their own Chpr program.
Up-DownENTER
MENU
Up-Down
ENTER
INFRARED MODE
Infrared remote control.
By activating Ir MODE, it will be
possible to navigate trought the
unit functions by using the D.T.S.
infrared remote control.
D.T.S. Code :0514L008
NOTE:
D.T.S. infrared remote control
needed.
D.T.S. Code :0514L008
(please check page 19 for details
on remote control functions)
Up-DownENTER
MENU
Up-Down
ENTER
FAN SPEED CONTROL
Internal Fan Speed control
selectable by user.
Range: OFF - 24 volt
Default : 12 volt
Fan Speed Control
Range: OFF - 24 volt
Default = 12 volt
EMERGENCY
Emergency operating mode.
By setting Emergency mode, it
will be possible to select one of
the 16 preprogrammed WHITE
cues that will then ran if DMX
signal is missing or not available.
Usefull for Emergency EXIT
ilumination on public areas.
Up-Down
MENU
Up-DownENTER
Up-DownENTER
ENTER
ENTER
Default = OFF
Default = White 1
Default = 255
ENTER
DELTA 8 B
16