Datasheet

9.3- Movement
Pan 180° (mechanical movement), Tilt 180° (mechanical movement)
9.4- Risk of fire
Each fixture produces heat and must be installed in a well-ventilated place. The minimum recommended
distance from flammable material is 1 MT.
Minimum distance from the object being illuminated is 0,5 MT.
9.5- Forced ventilation
You will note, on inspection, that the unit feature a thermal dissipator on the head. This should, under no
circumstances, be blocked or obstructed whilst the projector is in operation.
Doing so could cause the fixture to seriously overheat thereby compromising its proper operation.
9.6- Ambient temperature
The projector should never be installed in places that lack a constant air flow. The ambient temperature
should NOT exceed 40°C.
10- MAINS CONNECTION
DELTA 8 B operate at 90-260 VOLT 50-60 Hz.
Prior to connecting the unit to your mains supply,
ensure that the model in your possession
correctly matches the mains supply available.
For connection purposes, ensure that your plug
is capable of supporting 1 amps at 230V,
Or 2,5 amps at 90 V.
Strict adherence to regulatory norms
is strongly recommended.
10.1- Protection
The use of a thermal magnetic circuit breaker is recommended for each DELTA 8 B.
A good earth connection is essential for the correct operation of the projector.
0,5M
F
!
WARNING
Do not place any object in the path
of the projector’s movement
Pan
180°
Tilt
180°
!
DMX OUT
DMX 512
1 GND
2 DATA-
3 DATA +
LED OUTPUTS
4
5
6
7
9
2
Pin1
8
ANTENNA
WIRELESS
DMX
)
90-260 Vac
50/60 Hz
DMX IN
Mains
90-260V AC 50 / 60Hz
DELTA 8 B
10