Owner`s manual

<- When Input# 1 is selected

When Input# 2 is selected ->

You will see the following error message if the EDID data program failed or there is no EDID

data present. You may also want to check the cable connection or monitor’s power supply if an

error occurs:

Internal EDID Programming:

1. Press MENU button twice or more to find the appropriate EDID data for your application,

and then press the ENTER button to confirm the change.

=> =>

The internal EDID list is as follows:

The number represents the number of times the MENU button is pressed

1. EXT EDID 8. 1600x900

2. 800x600 9. 1600x1200

3. 1024x768 10. 1680x1050

4. 1280x1024 11. 1920x1200

5. 1360x768 12. 1080i 2ch(audio)

6. 1366x768 13. 1080p 2ch

7. 1400x1050 14. 1080p Multi

Please note that all DD-250 are normally set to 1920x1080p 2ch audio as a default setting

when released from the factory. If the default setting does not work for your system,

please program either an external EDID or an EDID from our pre-loaded selections .

EXT EDID LOAD

OUT1 to IN1

EXT EDID LOAD

OUT1 to IN2

EDID Loading!

Load Error

EXT EDID LOAD

OUT1 to IN1

1080i 2ch EDID

Save PORT IN1

WUXGA EDID

Save PORT IN1