Owner`s manual

3
1. PRODUCT OVERVIEW
1-1 SAFETY PRECAUTIONS
• All safety instructions should be read and understood before the unit is operated.
• The owner’s manual and safety instructions should be retained for future reference.
• Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth only.
• Keep away from wet, magnetic, and flammable surfaces or substances.
• Always use the correct external power supply (indicated on the product label) when operating this unit.
• This unit may be equipped with a 3 wire grounding-type plug - a plug having a third (grounding) pin. This
pin will only fit in to a grounding type power outlet. If you are unable to insert the plug in to the outlet,
contact your electrician to replace your obsolete outlet.
• Air vents should be kept clean and unobstructed at all times.
• Please refrain from using frayed power cords and damaged wall outlets.
• Do not place any heavy objects or equipment on top of the unit.
• To prevent electrical damage, TURN OFF the power to this unit before inserting or removing
INPUT/OUTPUT slot cards.
If you experience any problems while operating this unit, please contact our tech-support team at
[phone] or send us an inquiry at [e-mail].
Declaration of Conformity
According to Council Directive 73/23/EEC (February 19, 1973) on the Harmonization of the Laws of Member States relating to Electrical
Equipment; Council Directive 89/336/EEC (May 3, 1989) on Electromagnetic Compatibility; Council Directive 93/68/EEC (July 22, 1993)-
Amending Directives 89/336/EEC (MC) and 73/23/EEC (Low Voltage Equipment Safety), and/or CPU Boards and Power Supplies used
Council Directive 93/68/EEC with Matrix, Dtrovision, LLC., 286 Houses Corner Rd. Sparta, NJ 09871 973-383-4878, declares under sole
responsibility, that the product identifies with 93/66/EEC of the Council Directive Low Voltage Equipment Safety. Each product marketed is
identical to the representative unit tested and found to be compliant with the standards.