Owner`s manual

2
*255?I#!↵ or *255?O#!↵
Examples:
Command Codes
Action
*255?I01! ↵
Check Output connection status on Input 1
*255?O07! ↵
Check Input connection status on Output 7
*255?ALLIO! ↵
Check all Input and Output connection status
4.5 Router ID Check
User can confirm the router’s Current ID setting.
 Universal Router ID is 999
Example:
Command Codes
Action
*999I000! ↵
Check Router’s ID
4.6 Firmware Version Check
User can confirm router’s current firmware version.
Example:
Command Codes
Action
*999?version! ↵
Check Router’s Firmware version
4.7 Baud Rate Setting
User can set baud rate for RS-232 command control.
1. Enter the Baud rate setting command below. Replace the “#”s with the input and output number(s).
*255@#! ↵
@001: Baud rate at 19200
@002: Baud rate at 38400
@003: Baud rate at 57600
@004: Baud rate at 115200
Example:
Command Code s
Action
*255@001! ↵
Set baud rate at 19200
*255@002! ↵
Set baud rate at 38400
*255@003! ↵
Set baud rate at 57600
*255@004! ↵
Set baud rate at 115200
Network Configuration:
User can check and set network configuration for LAN control.
Examples:
Command Code s
Action
*255NNI000! ↵
Check current Network Information
*255NIP192.168.000.004! ↵
Set IP address at 125.135.199.004
*255NSM255.255.255.000! ↵
Set Subnet Mask at 255.255.255.000
*255NGW192.168.000.001! ↵
Set Gate Way at 192.168.000.001
*255NMA00.00.C2.B0.20.05! ↵
Set Mac Address at 00.00.C2.B0.20.05
*255NPN3000! ↵
Set Port Number at 3000