Owner`s manual

• Power Switch: turn power to the unit ON or OFF

MX-8000 Front Panel Switches & Functions

• System Check: troubleshoot when error messages appear

• Reset: push button 3-4 seconds to reboot the unit

• Touch Screen ON/OFF: turn the touch panel display ON or OFF

• Back Light ON/OFF: turn touch panel backlight ON or OFF

• RS-232: shows RS-232 communication status

If matrix is switched ON, front touch panel shows internal set up status after initiation of the system. Then it shows

main menu as follows.

• CREATE: set input/output channels

Touch Panel Display Main Menu

• PREVIEW: preview the status of input/output channels or EDID set up

• SYSTEM CONFIG: set up internal system

• SYSTEM INFO: review the general status of the system

• PRESET: save input/output channels to memory

• EDID: retrieve and save the EDID data from displays

To Select INPUT/OUTPUT Channels:

Press CREATE on the main menu to open the screen in the figure below

Press CHANNEL INPUT menu -> Select INPUT button

Press UP CHANNEL to select up to 20 channels

Press DOWN CHANNEL to reverse the selection