Owner`s manual

PureLink GmbH
22
4-1.2 Disconnecting Switches
The characters and numbers in a Disconnect command tell the system which input or output
to disconnect. The “D” key initiates a Disconnect command for routing a switch. The
characters and numbers that follow the “D” command tell the system that inputs and
outputs to disconnect. The last character “!” is found at the end of the Command code,
which tells the system to execute the command.
For example, the command code
*255DI01O00! ¶
It can be interpreted as follows: (*) Starting the command code (255) Router ID is 255 (D)
Disconnect on (I01) Input 01 to (O00) Output 00 (!) take the command. For a complete list
of command characters and their functions, see the command list below
1. Enter the Disconnect command below. Replace the “#”s with the input and output number(s).
*255DI#O#! ¶
Examples (Disconnect Video and Audio):
Command Codes
Action
*255DI01O00! ¶
Disconnect Input 1 to no Output (00)
*255DI00O03,04,05! ¶
Disconnects Outputs 3, 4, and 5
*255DI00O03-06! ¶
Disconnects output 3, 4, 5, and 6
*255DALLIO! ¶
Disconnects all inputs and outputs
Examples(Disconnect Video only):
Command Codes
Action
*255VDI01O00! ¶
Disconnect Input 1 to no Output (00)
*255VDI00O03,04,05! ¶
Disconnects Outputs 3, 4, and 5
*255VDI00O03-06! ¶
Disconnects output 3, 4, 5, and 6
*255VDALLIO! ¶
Disconnects all inputs and outputs
Examples(Disconnect Audio only):
Command Codes
Action
*255ADI01O00! ¶
Disconnect Input 1 to no Output (00)
*255ADI00O03,04,05! ¶
Disconnects Outputs 3, 4, and 5
*255ADI00O03-06! ¶
Disconnects output 3, 4, 5, and 6
*255ADALLIO! ¶
Disconnects all inputs and outputs