Owner`s manual

PureLink GmbH
19
entries containing multiple numbers
0x49
0x69
I
i
Router ID check
Router ID check command; check
router’s current ID number
1
?version
Firmware version
check
Firmware version check command;
*255?version! ¶
0x40
@
Baud rate setting
Baud rate sting command;
*255@001!¶ → 19200
*255@002!¶ → 38400
*255@003!¶ → 57600
*255@004!¶ → 115200
0x4E
0x6E
N
n
Networking setting
Network configuration setting
command:
- IP Setting
*255NIP125.135.199.004! ¶
- Subnet Mask Setting
*255NSM255.255.255.000! ¶
- Gate Way Setting
*255NGW192.168.000.001! ¶
- MAC Address Setting
*255NMA00.50.C2.B0.20.05! ¶
- Port Number Setting
*255NPN3000! ¶
- Network Information
*255NNI000! ¶
1
0x48
0x68
H
h
Connection check
Router communication connection
check command: *255H000! ¶
1
Command Ack (Acknowledge) Value Response
When command codes are entered into a terminal emulation program (such as
HyperTerminal) and are accepted by the system, they respond back to the terminal screen
one at a time, as noted below in the table. The complete command has executed
successfully when all of the entered characters including “s” which stands for status, appear.
If a command character is not accepted, a different character than the one entered appears
and all or part of the command has not been executed.