User manual

Declaration of Conformity
According to Council Directive 73/23/EEC (February 19, 1973) on the Harmonization of the Laws of Member
States relating to Electrical Equipment; Council Directive 89/336/EEC (May 3, 1989) on Electromagnetic
Compatibility; Council Directive 93/68/EEC (July 22, 1993)-Amending Directives 89/336/EEC (MC) and
73/23/EEC (Low Voltage Equipment Safety), and/or CPU Boards and Power Supplies used Council Directive
93/68/EEC with Matrix, Dtrovision LLC., 9A Bergen Turnpike Little Ferry,NJ 07643 201-488-3232, declares under
sole responsibility, that the product identifies with 93/66/EEC of the Council Directive Low Voltage Equipment
Safety. Each product marketed is identical to the representative unit tested and found to be compliant with the
standards.
1-2 Package Includes
▪ Main body: MX-1800
▪ Power adapter: DC12V, 12A
▪ RS-232C & LAN cables
▪ User’s manual
11--3 Features of the product3 Features of the product
Digital Matrix Router (MX-1800) supports all kinds of digital interfaces such as DVI, HDMI, which are applied to
most digital products. It is designed to meet customers’ needs, providing prompt availability for any interface with
simple replacement of Input/Output cards. MX-1800 is integrating multiple DVI digital video sources with multiple
displays.
▪ 19” standard rack type case (6U)
▪ Can use up to 18 outputs monitors or displays
▪ Supports various combination with Input / Output cards based on backplane
▪ Supports reading and saving function of EDID data from displays
▪ Plug-and-play of windows which makes set up and installation easy.
▪ Compliant to High-bandwidth Digital Content Protection (HDCP)
▪ Supports high resolution up to WUXGA(1920x1200)@60Hz, 1080p@60Hz
▪ Convenient control using 3 methods
- Select by front push buttons directly
- Select by LAN (TCP/IP).
- Control method through RS-232C COM port
▪ It has an instantaneous noise protection circuit in input and output ports therefore it can protect expensive
equipment from fault caused by noises (if any).
▪ Convenient to change firmware through directly update by PC.
6