User manual

4-2 LAN communication code
configuration
1. Switching by explorer Command set
sent to web server (matrix router) for
Switching
Beginning with character train of LCD.CGI”,
“O 01 = I 18” means “Output 01 Input 18”,
the sequences and sizes of character train
should be the same.
After execute reset, it should be connected
again to server (switcher).
Channel change
http://192.168.0.2/LCD.CGI?O01=I16&O02
=I18&O03=I11&O04=I12&O05=I13&
O06=I08&O07=I15&O08=I16&O09=I
17&O10=I02&O11=I01&O12=I02&O
13=I03&O14=I04&O15=I05&O16=I0
6&O17=I07&O18=I08&Submit_=SE
MX
MXMX
MX-
--
-1800
18001800
1800
ND
Initialization (Reset)
http://192.168.0.2/LCD.CGI?O01=I16&O02
=I18&O03=I11&O04=I12&O05=I13&
O06=I08&O07=I15&O08=I16&O09=I
17&O10=I02&O11=I01&O12=I02&O
13=I03&O14=I04&O15=I05&O16=I0
6&O17=I07&O18=I08&Submit_=Res
et
46