User Manual Ver 1.
Table of Contents 1. BASIC UNDERSTANDINGS OF THE PRODUCT 1-1. CAUTIONS FOR SAFETY 1-2. PACKAGE INCLUDES 1-3. FEATURES OF THE PRODUCT 1-4. NAMES AND FUNCTIONS OF EACH PART 1-5. INSTALLATION ENVIRONMENTS AND METHODS 2. FUNCTIONS OF THE PRODUCT 2-1. SYSTEM OPERATION CONFIGURATION DIAGRAM 2-2. SPECIFICATIONS OF THE PRODUCT 3. HOW TO USE 3-1 HOW TO SET CHANNELS 3-2 PRODUCT NUMBER SETTING 3-3 RS-232C (COM PORT) COMMUNICATION SETTING 3-4 LAN (TCP/IP) COMMUNICATION SETTING 4. COMMUNICATION CODE CONFIGURATION 4-1.
1. Basic understandings of the product 1-1 C Cautions autions ffor or s safety afety • All the safety and user manual should be read before the appliance is operated. • The safety and operating instructions should be retained for future reference. • Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. • Do not use this equipment near wet place.
Declaration of Conformity According to Council Directive 73/23/EEC (February 19, 1973) on the Harmonization of the Laws of Member States relating to Electrical Equipment; Council Directive 89/336/EEC (May 3, 1989) on Electromagnetic Compatibility; Council Directive 93/68/EEC (July 22, 1993)-Amending Directives 89/336/EEC (MC) and 73/23/EEC (Low Voltage Equipment Safety), and/or CPU Boards and Power Supplies used Council Directive 93/68/EEC with Matrix, Dtrovision LLC.
1-4 Names and functions of each part the right side 1-5 Installation environments and methods ▪ For installation environments, we recommend the following environments for our matrix. ▪ Below 30°C of ambient temperature (Best ondition) ▪ Install and operate in the environment below 60% of ambient humidity (Best condition) ▪ Use it in the environment of free of vibrations and dusts and in good ventilation condition ▪ Recommend stabilized AC input power (Recommend to use AVR).
2. Functions of the product 2-1. System operation configuration diagram Operation configuration diagram of the matrix is shown in following picture. Any of the input signals can be selected to each output port by front panel switch, external RS232C or LAN. Any combinations of input signals can be selected at output side.
2-2 Specifications of the product ▪ Type of signals: TMDS signals, digital R.G.B. 2k ▪ HDMI data transmission band: 2.25 Gbps (single link). ▪ DVI-D data transmission band: 1.65 Gbps (single link). ▪ HDMI version 1.3 with deep color 36 bits ▪ Resolutions: VGA (640*480) ~ WUXGA (1900*1200)@60Hz, 720p~1080i/p. ▪ Audio IN/OUT: digital audio coaxial (DVI board only) ▪ Panel: 7 inch touch panel, pressure recognition type ▪ Port switch control: Front LCD touch panel, RS-232C port, LAN port.
3. How to use 3-1 How to set channels If matrix is switched ON, front touch panel shows Internal set up status after initiation of the system. Then it shows main menu as follows.
RESET: If you push this button for 3 seconds, it executes rebooting of the system. Set up data and final switching data are recovered.
OK: finish the channel set up -> return to main menu PRESET SAVE -> start PRESET menu RETURN -> return to CHANNEL OUTPUT menu Retrieve and Save of EDID: If EDID on main menu is selected, right screen will show up 12
OUTPUT EDID SELECT menu -> select OUTPUT to retrieve Push EDID INPUT button -> select INPUT button (multi ## selection) -> push ENTER button SET ALL: select all output CLEAR ALL: cancel all selection OK: finish the EDID save -> return to main menu RETURN -> return to INPUT EDID SELECT menu 13
Preview of Input and Output Channel or EDID selection: If PREVIEW on main menu is selected, right screen will show up Input and Output CHANNEL PREVIEW menu shows up as initial screen INPUT VIEW -> show the status of switching based on Input OUTPUT VIEW -> show the status of switching based on output MATRIX VIEW -> show the status of input/output at the same time ARROW -> move the screen to front, back, left and right side CANCEL -> return to main menu If EDID Channel button is selected, EDID PREVIEW menu
System set up: If SYSTEM CONFIG is selected, right screen will show up SYSTEM CONFIG is for the set up of RS-232, LAN, and SYSTEM. RS-232 set up menu shows up as initial screen. Baud Rate: set up communication speed of RS-232 ,default: 19200BPS DATA Bits: set up data bits, default: 8 bit Stop Bits: set up stop bits, default: 1 bit Parity: confirm parity, default: Disable SAVE: save set up CANCEL: return to main menu If LAN menu on the right side is selected, right LAN set up menu shows up.
If SYSTEM menu on the right side is selected, right SYSTEM set up menu shows up. Buzzer: Buzzer sound On/Off SAVE: save set up CANCEL: return to main menu Preview of Channel and System set up: If SYSTEM INFO is selected, right screen shows up. SYSTEM INFO tells current status of channel selection and system set up.
Preset set up: If PRESET on main menu is selected, right screen shows up. It previously saves the selection of input/output channels up to 20. PRESET PREVIEW -> show the status of saved preset Channels PRESET RENAME -> rename saved preset number and name PRESET CALL -> change current channels to channels of selected preset CANCEL -> return to main menu PRESET NAME -> change the name of preset selected by preset number. Name is up to 12 letters.
Preset Save: Create-> Input-> Select#-> Output> Select Multiple ##->If you add more input go to Input again-> If you done all Input and Output ->Enter-> Preset Save->Preset Number -> Select#-> Preset Name ->Input Name->Save Preset Call: Preset Call-> Select Preset Name-> Preset Call 3-2 Product number setting ▪ Product ID setting (DIP switch) ▪ It sets its own address of matrix if many matrixes are used. ▪ It sets in binary values.
RS-232C 1. PureLink S/W RS 232C port setting Step1. Go to Control Panel. Step2. Go to Device Manager and select Communications Port(COM1) as right.
Step3. Select Properties at the bottom. Step4. Choose Port Settings and click Advanced button.
Step5. Choose the COM port in use on your PC. Step6. Click MX-1800 icon Step7. You might meet pop up window as right , but just click “OK” button.
Step8. Go to “Setting” on the top menu and choose port which is in use . (Remember Step5 !) Step9. Go to “Option “ and select “Assign RS232” Step10. Input values as right and click “Assign” button.
Step11. If you get ASCII code as right on the Response field, then you are in success. Step12. Go to “Control“ and click “Add” button. Step13. When you get pop up window as right, then click “OK” button.
Step14. Now you can see an added switch and channel list. Step15. Select line number as you want. Step16. You can see the command sent to router, as you change the line number.
RS-232C 2.Hyper terminal or other applications (We are using similar S/W named ComMaster) Step1. Execute ComMaster and click “Open Com” button. Step2. Input ASCII command code such as !010101040101020304*.
RS-232C Example of communication code when product ID is set to “01”. Example of communication code when product ID is set to “01”. See the chap4. Communication code configuration . Step3. Click “Send” button, then you will get !010101* on the text window. It means that the command is sent successfully.
RS-232C When incorrect command is sent to matrix router, you will get no response.
RS-232C 3. External Controller(Barco) RS 232C port setting Step1. Go to website barco home. Select Products tab and go to Image Processi ng . Then find presentation System. http://www.barco.com/corporate/en/products/produ ct_downloads.asp?element=2487&lid=EN Step2. Go to Downloads Tab.
Step3. Go to website barco home. Select Products tab and go to software. Then select Encore Controller. Step4. Download Encore Controller as right.
RS-232C 3. External Controller RS 232C port setting Step1. Execute flash loader. Step2. Select Communication Tab as right.
Step5. Select COM Port and available port as right. Step6. Set Baud value as right.
TCP/IP(LAN) 1. PureLink S/W TCP/IP setting Step1. Connect LAN cable to router and push reset button or turn off and on Power switch. . Step2. Go to “Setting” tab menu, then you will see messages as right. Step3. If C key is inputted, existing set information is displayed as right. G(g): set up gateway address S(s) : set up subnet mask I (i) : set up IP address E(e): save all information and exit.
Step 4. If you push “Check User Computer’s LAN Setting” button, it will show user’s local network Information .
TCP/IP(LAN) 2. Hyper Terminal or other similar S/W (We are using Mini Term) After setting as above, connect communication And switch “ON” the MX-1800 If right screen shows up, press C key to start network configuration. If C key is not pressed or ESC key is pressed, then it will be operated with existing IP. If D key is inputted, existing set information is displayed.
Input G key and input Gateway IP. Input S key and input subnet mark.
Input I key and input EDM-1818M IP Address Input H key and input hardware address 36
If all inputs are completed, exit the configuration by inputting E key.
TCP/IP(LAN) 3. External Controller(Barco) Step1. Select Communication Tab and Ethernet as right. Step2. Select Connect Menu.
TCP/IP(LAN) Step3. It shows default IP address. Step4. If IP address is not correct, it will show as right.
Step5. Type Router ip address as your network environment and push Connect button .
If Explorer is executed and set IP is inputted, you can see the screen to Change channels as right. If you select Input channel for output and press SEND, the channel will be changed.
4.
Example of communication code when product ID is set to “01”.
Baud rate: “ 00 ” : 1920 bps “ 01 ” : 4800 bps “ 02 ” : 9600 bps “ 03 ” : 14400 bps “ 04 ” : 19200 bps “ 05 ” : 28800 bps “ 06 ” : 38400 bps “ 07 ” : 57600 bps “ 08 ” : 76800 bps “ 09 ” : 115200 bps “ 10 ” : 250000 bps Data bit: “ 00 ” : 8 bit “ 01 ” : 5 bit “ 02 ” : 6 bit “ 03 ” : 7 bit Stop bit: “ 00 ” : 1 bit “ 01 ” : 2 bit Parity bit: “ 00 ” : disable “ 01 ” : even parity “ 02 ” : odd parity ***** Attention on RS-232C communication control **** If user develops control program without using Digital Cont
4-2 LAN communication code configuration MXMX-1800 1. Switching by explorer Command set sent to web server (matrix router) for Switching Beginning with character train of LCD.CGI”, “O 01 = I 18” means “Output 01 Input 18”, the sequences and sizes of character train should be the same. After execute reset, it should be connected again to server (switcher). Channel change http://192.168.0.2/LCD.
4-3 Connector Pin Assignment POWER INPUT 47
5. Warranty Information • 1 (One) Year Warranty PureLink warrants this DVI Switcher to be free fr om defects in workmanship and materials, under normal use and service, for a period of one (1) year from the date of purchase from PureLink or its authorized resellers.
PureLink GmbH Hovesaatstraße 6 D-48432 Rheine Telefon: +49 (0) 5971 800 299-0 Fax: +49 (0) 5971 800 299-99 E-mail: info@purelink.de www.purelink.de For order support, please contact your local dealer. For technical support, please contact us at support@purelink.
