DCE Owner’s Manual DVI over Cat5/6 Extension System w. digital/stereo Audio Dtrovision LLC 9A Bergen Turnpike Little Ferry, NJ 07643 Tel: 201.488.3232 Fax: 201.621.6118 E-mail: mpark@dtrovision.com www.purelinkav.com For technical support, contact: support@dtrovision.
PureLink by Dtrovision Package Contents Please make sure all of the following items are included in the package: 1) DCE Transmitter Module 2) DCE Receiver Module 3) 6ft DVI-D Cable (x2) 4) DC 12V Power Supply Unit with a power cord 5) DC 12V Power Supply Unit with a power cord 2
PureLink by Dtrovision General Specification DCE is a DVI, surround digital audio and analog audio extension system over CAT5 cable for long distance up to 165ft. Its compact & durable design and low power consumption makes it an ideal solution for connection for high definition video and audio signal of digital displays such as LCD/Plasma monitor and Projector.
PureLink by Dtrovision Operation and Reliability Specification 1. Operating Environment Temperature : 50F ~ 104F (10℃~ 40℃) Humidity : 10% ~ 80% Altitude : 3,000m Max. 2. Transit Environment Temperature : -13F ~ 140F (-25℃~ 60℃) Humidity : 5% ~ 95% Altitude : 15,000m Max. 3. Storage Environment Temperature : -4F ~ -49F (-20℃~ 45℃) Humidity : 5% ~ 95% Altitude : 3,000m Max. 4.
PureLink by Dtrovision Main Features 1. Zero loss & Zero noise delivery of digital high definition video and audio signal us ing UTP connection, DCE delivers HD signals over CAT-5 cable without loss or digi tal interference maintaining the clarity and colors. Noise cancellation and error c orrection logic enhances video and audio signals over long distance. 2. Built-in signal repeater to support longer distance between the source and the D CE transmitter & DCE receiver and the display.
PureLink by Dtrovision Installation and Connection Instructions Installation and Connection Instructions 1. Turn off both the video source and the display before connecting any cables. 2. Connect CAT5 cable between the DCE transmitter and the DCE receiver. 3. Connect DVI cable between the source and the DCE transmitter AND the DCE receiver and the display. 4. Connect the power supply unit to both DCE transmitter and receiver module. 5. Turn on Display. 6. Turn on Video Source.
PureLink by Dtrovision Signal Status LCD Display The LCD panel on DCE transmitter and receiver shows the current signal status. Example Status: How to install Cat5 cable DCE was designed to conform to TIA/EIA-568-B standard. Please ensure that each PIN layout of DCE transmitter and DCE receiver are corresponding with the picture below before connecting the cable. Please note that CAT5e or above level cable enables to deliver better video quality and longer distance.
PureLink by Dtrovision DCE Transmitter and Receiver Specification 1.1 DCE Transmitter and Receiver Specification Module Dimensions: 53.6x46.5x9.
PureLink by Dtrovision Technical Specification Data Transfer Speed: Frequency Range: Supporting Display Resolutions: I/O Signal Standard: Max Distance: UTP Cable specification: Input Ports: Output Ports: Power Consumption: Power Rating: Up to 2.25 Gbps (Single Link) 25 ~ 165 MHz Up to WUXGA (1920X1200)@60Hz / 1080p Digital RGB, TMDS 50m (165ft) at 1920x1200@60Hz / 1080p CAT-5/5E/6 DVI-D Female 29P / RJ-45 / RCA / Optical DVI-D Female 29P / RJ-45 / RCA / Optical Transmitter: 1.65 Watts (Max) / Receiver: 2.
PureLink by Dtrovision Warranty 2 (Two) Year Warranty Dtrovision warrants this fiber optical DVI extension cable to be free from defects in workmanship and materials, under normal use and service, for a period of two (2) year from the date of purchase from Dtrovision or its authorized resellers.
PureLink by Dtrovision FCC/CE Statement This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must not accept any interference received, including interference that may cause undesired operation.
