Specifications

52
Symptom Possible Causes Remedies Prevention
n/a Best results are achieved
with 100% cotton.
Garments requiring white
ink should have only a low
polyester content
Check the accuracy of the
ing the garment
ess
and properly cure
When cur
in a heat press, the pr
should rest gently over
the garment & protective
sheet to allow moisture
from the inks to escape
Follow the guidelines for
Prints peel or rub off
wash out, or fade after
few washes
,
only a
Too high a polyester content in
fabric, particularly with white i
prints
nk
Too much or too little pressure on
heat press during curing
Temperature on heat press is too
high or too low
Improper pre-treatment of
garment
Improper wash settings
heat press temperature
emperature
and curing guidelines as
per Section 7.1
Follow the t
pre-treatment as per
section
7.1
be washed in cold water
(garment turned inside-
out). Delicate dryer
settings
Printed garments should